suzuki Posted June 18, 2014 Share Posted June 18, 2014 Can someone post a high resolution picture with XFX Gts 250 and aeventually the mod for it (mem + gpu) ? My card was in some kind of ink and i cannot see anything on it. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
der8auer Posted June 18, 2014 Share Posted June 18, 2014 There are several different layouts. Which card exactly do you have? Quote Link to comment Share on other sites More sharing options...
suzuki Posted June 18, 2014 Author Share Posted June 18, 2014 i hope it is helpfull. The card is amazing on mem,and decent on gpu with air cooling,in the screen is no vmod done. Quote Link to comment Share on other sites More sharing options...
der8auer Posted June 18, 2014 Share Posted June 18, 2014 Can't find anything in my database but mod should be no problem. Can you take a picture of the backside of the VRMs? Quote Link to comment Share on other sites More sharing options...
suzuki Posted June 19, 2014 Author Share Posted June 19, 2014 Where else would you like details ? I've cleaned with izopropilic alcohol as much as i could. Quote Link to comment Share on other sites More sharing options...
suzuki Posted June 19, 2014 Author Share Posted June 19, 2014 Sorted out with the help of Nachtfalke. 200 Kohm at Fb pin 6 like in the picture + ground. Results : Model : XfX GTS 250 - 512 Mb OEM Cooling : Watercooling + 4x5500@120mm@Delta Ambient : 29.4 grade Frequencies stock/oc: 738/1836/1100 <=>891/2100/1480 Voltage stock/oc: vgpu= 1.250vGpu@?vMem // 1.43vGpu@? vMem Cpu/Speed: 4670k /3,4 ghz Nature: 360.8 fps It's pure gold memories.I think they can go at 1600 mhz with Vmem mod and proper voltage . Btw,first screen was made at 8 degrees ambient in January,hence the frequency. Next step on Gpu is 918 and it's not possible ,i;ve tryed up till 1.43,i don't want to go higher for the moment.No OCP encountered. Quote Link to comment Share on other sites More sharing options...
nachtfalke Posted June 20, 2014 Share Posted June 20, 2014 the pwm is RT8841 with FB pin6 , you will have ocp trigger if you go higher ( 1,55+) but also can configure the ocp from pin9( imax) no problem the memory pwm should be RT9259 ( i can´t see good in the pic´s)with FB pin4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.