Guest barbonenet Posted August 25, 2014 Share Posted August 25, 2014 i open a thread guys! i'm trying again....... first question: disable ulps need on afterburner? Quote Link to comment Share on other sites More sharing options...
riska Posted August 25, 2014 Share Posted August 25, 2014 disable ulps is only for crossfire Quote Link to comment Share on other sites More sharing options...
Guest barbonenet Posted August 25, 2014 Share Posted August 25, 2014 ok, now i have reinstalled system.....and afterburner!!! this ttime i don't check "disable ulps" and i benched at -120 without any blincking.....at only 1500 on core +350v (at unigine11)! i hope is this setting the problem........ but now, if i give volt, card shutdown during bench........does it need more vaux?? thanks Quote Link to comment Share on other sites More sharing options...
Splave Posted August 25, 2014 Share Posted August 25, 2014 did you do the mod? Quote Link to comment Share on other sites More sharing options...
Guest barbonenet Posted August 25, 2014 Share Posted August 25, 2014 yeah....sorry, part of this discussion is on "Coldslow vga bios"....... rail .95v at 1,25 - 1,30 (it throttle) Quote Link to comment Share on other sites More sharing options...
zzolio Posted August 25, 2014 Share Posted August 25, 2014 you have ocp 350 is alot for 1500 I can bench 1600 at +350vcore try +100aux and +100mem core temp-120 to -140 1 Quote Link to comment Share on other sites More sharing options...
Guest barbonenet Posted August 25, 2014 Share Posted August 25, 2014 thanks zzolio...i use already +100 on aux and mem....i try at 1550 +350 but it freeze at loop23 in unigine....image is lock, and after 3-4sec i see artifacts. unlucky card? Quote Link to comment Share on other sites More sharing options...
Splave Posted August 25, 2014 Share Posted August 25, 2014 not every card can do 1600 bro Quote Link to comment Share on other sites More sharing options...
Crew Vivi Posted August 26, 2014 Crew Share Posted August 26, 2014 i beg to differ with zollio, i benched 1650 at +420 haha. 1.73v real. no OCP issues. might be PSU? Quote Link to comment Share on other sites More sharing options...
Guest barbonenet Posted August 26, 2014 Share Posted August 26, 2014 yesterday i use my second bench station, it have only and old corsair 750tx....next time i use my first station...with ax1200i Quote Link to comment Share on other sites More sharing options...
Crew Vivi Posted August 26, 2014 Crew Share Posted August 26, 2014 yesterday i use my second bench station, it have only and old corsair 750tx....next time i use my first station...with ax1200i i am surprised you made 1500 with 750tx hahah 1 Quote Link to comment Share on other sites More sharing options...
Moose83 Posted August 27, 2014 Share Posted August 27, 2014 There you have your Problem Quote Link to comment Share on other sites More sharing options...
Guest barbonenet Posted August 31, 2014 Share Posted August 31, 2014 (edited) yesterday rail 0.95v was dead! today i mount epower on this rail, and now card work again.......tomorrow i try to make some points;) Edited August 31, 2014 by barbonenet Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.