Hiwa Posted September 9, 2014 Share Posted September 9, 2014 Started test the new monster of shambolo test setup: 16 GB (4x4) G.Skill Ripjaws4 DDR4-3000 MHz CL15-15-15-35-2N 1.35V Single-Sided ASUS Rampage V Extreme ALL AIR 3000MHz CL12 1.55Vdimm 1.0V NBV 3100MHz CL12 1.55Vdimm 1.0V NBV to have high Cache you need cold CPU, here i have CPU under Ln2 -50 3000 CL11 Vdimm: 1.8 Vnb : 1.4 some intressting score 3050 Cl11 +5078MHz Cache Maxxmem 3000 Cl11 Highest Aida read we ever seen ? 3000 Cl11 Cinebench at only 5280Mhz efficiency is great caz the tight ram and high nb CPU AND MEMORY under LN2 No CB on S-Sided MFR but there is always cold spot point for this kit i used -120 Some more score here CL10 under Ln2 is done 3.0GHz Cl10 3080 CL10 with 13tRCd is just nice too se but more than that 5130 Uncore on RVE QuadChannel with memory is WOW Quote Link to comment Share on other sites More sharing options...
Hiwa Posted September 9, 2014 Author Share Posted September 9, 2014 2666 8-12-12-15 DDR4 CL8 fun Updated Cinebench with Tighter timing and higher cache frequency Quote Link to comment Share on other sites More sharing options...
Xtreme Addict Posted September 9, 2014 Share Posted September 9, 2014 Nice Waiting for more your results with different ICS Quote Link to comment Share on other sites More sharing options...
rsnubje Posted September 9, 2014 Share Posted September 9, 2014 Nice stuff Any tips on mem oc with R5E? Can't seem to get it working properly. I also have a 3000C15 Gskill kit and a 2400C15 gskill kit, basicly 1.35v for the 3000 MHz kit and 1.2v for the 2400 MHz kit. On a Gigabyte SOC Force, the 2400 kit can run 3000 12-14-14-24 2T on 1.55v, but when I try the exact same timings with the 3000 MHz kit on the R5E, they won't work. Also when I disable ram training or whatever, it doesn't boot at any setting. Quote Link to comment Share on other sites More sharing options...
Hiwa Posted September 9, 2014 Author Share Posted September 9, 2014 (edited) 125 strap straight boot and hyperpi no problem at all here. Use xmp if you are not able to boot when set manually, also check your cache frequency. Good luck Thanks Xa Edited September 10, 2014 by Hiwa Quote Link to comment Share on other sites More sharing options...
Hiwa Posted September 15, 2014 Author Share Posted September 15, 2014 More here Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted September 15, 2014 Crew Share Posted September 15, 2014 Crrrrraaaaaaaaaazzzzzzzzzyyyyyyyyy Quote Link to comment Share on other sites More sharing options...
dx4picco Posted September 15, 2014 Share Posted September 15, 2014 Is all high end DDR4 SS? Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted September 15, 2014 Share Posted September 15, 2014 The only available density at this point is 4Gbit. So 4GB modules are single-sided and 8GB modules are dual-sided. Quote Link to comment Share on other sites More sharing options...
dx4picco Posted September 15, 2014 Share Posted September 15, 2014 okay thanks does it also affect performances like mfr Ss on s1150 for example? does dual sided crush a lot Oc ability or not? Quote Link to comment Share on other sites More sharing options...
Hiwa Posted September 16, 2014 Author Share Posted September 16, 2014 I personally didn't try any double sided, but must be same as ddr3 version. Quote Link to comment Share on other sites More sharing options...
CL3P20 Posted September 16, 2014 Share Posted September 16, 2014 Pushing some amazing clocks for C10 .. love it! Thank you for a glimpse of what Hynix ddr4/LN can do! *envious of your cache speeds !! Quote Link to comment Share on other sites More sharing options...
Crew Vivi Posted September 17, 2014 Crew Share Posted September 17, 2014 super fast memory clocks right there wow~! Quote Link to comment Share on other sites More sharing options...
Hiwa Posted September 18, 2014 Author Share Posted September 18, 2014 Pushing some amazing clocks for C10 .. love it! Thank you for a glimpse of what Hynix ddr4/LN can do! *envious of your cache speeds !! Hope more people join the DDR4 ln2 club soon. Thanks vivi Quote Link to comment Share on other sites More sharing options...
Hiwa Posted September 29, 2014 Author Share Posted September 29, 2014 more benchinbg 32m at 4g and XTU 4775 cache my best run +3.0G CL9 44/44 5/5 4G http://www.ocaholic.ch/modules/xcgal/albums/userpics/10637/screen057~0.jpg 5G http://www.ocaholic.ch/modules/xcgal/albums/userpics/10637/screen059.jpg 5280 http://www.ocaholic.ch/modules/xcgal/albums/userpics/10637/screen061.jpg Some Ice Quote Link to comment Share on other sites More sharing options...
nXXo Posted September 29, 2014 Share Posted September 29, 2014 very very nice result hiwa Bravo! Quote Link to comment Share on other sites More sharing options...
Hiwa Posted October 2, 2014 Author Share Posted October 2, 2014 Thanks nXXo playing playing and playing, training training gave me 43/43 C10 nice job asus, 5035 uncore incoming later Quote Link to comment Share on other sites More sharing options...
sabishiihito Posted January 8, 2015 Share Posted January 8, 2015 Picked up a kit of the black version: Quote Link to comment Share on other sites More sharing options...
subaruwrc Posted April 1, 2015 Share Posted April 1, 2015 how can i get this kit to work at rated specs on giga x99 soc force ? with a 5820k cpu i cannot boot over 125*22 - 2750mhz. 3000mhz is a no go. f6 bios. f6i beta either. Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted April 1, 2015 Crew Share Posted April 1, 2015 Either the board or the IMC can't take it. My 5820K only does 3000Mhz stable under cold... Quote Link to comment Share on other sites More sharing options...
subaruwrc Posted April 1, 2015 Share Posted April 1, 2015 Either the board or the IMC can't take it. My 5820K only does 3000Mhz stable under cold... My feeling is that the imc is not up for the task. Will try it under cold if it helps. Quote Link to comment Share on other sites More sharing options...
subaruwrc Posted April 2, 2015 Share Posted April 2, 2015 It seems a no go with this chip. No cold test in the coming weeks so stuck with that. Quote Link to comment Share on other sites More sharing options...
subaruwrc Posted April 5, 2015 Share Posted April 5, 2015 Either the board or the IMC can't take it. My 5820K only does 3000Mhz stable under cold... yes that would be the case here too. pushed out 3k triple channel but quad freezes at win boot. cold next week.. Quote Link to comment Share on other sites More sharing options...
ObscureParadox_3XS Posted April 5, 2015 Share Posted April 5, 2015 What BCLK strap are you guys using? 125MHz gave me more problems than 100 when I tried it out for the first time a few weeks ago. Quote Link to comment Share on other sites More sharing options...
subaruwrc Posted April 5, 2015 Share Posted April 5, 2015 What BCLK strap are you guys using? 125MHz gave me more problems than 100 when I tried it out for the first time a few weeks ago. 125 is more friendly to me. with 100mhz strap I can only boot up to x24.00 .. x26 no go x26.66 almost boots but freezes at 91 code ( x99 soc force ) 125 strap works up to x26.00 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.