Nassuz Posted September 10, 2014 Share Posted September 10, 2014 I was not sure were to put this question,so please remove or moove if its in the wrong section. I have problem with my GTL not reading the Pentium G3258 correct. see pic. MB Gigabyte Z87X OC bios F9c. Seems like it reads the stock clock, but I did oc from bios,as show`n in cpuz. Is this normal? First time using the GB mobo. cheers John Quote Link to comment Share on other sites More sharing options...
skulstation Posted September 10, 2014 Share Posted September 10, 2014 (edited) I have the same thing.but when i click on read, it shows the corekt multi and speed Edited September 11, 2014 by skulstation Quote Link to comment Share on other sites More sharing options...
Massman Posted September 11, 2014 Share Posted September 11, 2014 Moved it in the Haswell subforum Quote Link to comment Share on other sites More sharing options...
stasio Posted September 11, 2014 Share Posted September 11, 2014 Wrong GTL..... Install GTL B14.0611.1 (uninstall previous): http://download.gigabyte.eu/FileList/Utility/mb_utility_tweaklauncher2.zip Edit: For your board all utilities are here: http://www.gigabyte.com/products/product-page.aspx?pid=4514&dl=1#utility Quote Link to comment Share on other sites More sharing options...
Nassuz Posted September 11, 2014 Author Share Posted September 11, 2014 Danke Quote Link to comment Share on other sites More sharing options...
phobosq Posted September 22, 2015 Share Posted September 22, 2015 Sorry for digging that up, but I have the same combo, Z87X-OC + G3258, bios F9c, had the same situation with cpu multi, but I also found that I am unable to stabilize my PSC at 2600 and 2666 dividers. The whole computer boots and enters into XP, but 1M is the most I can make, regardless of voltage. I tried using RAM profiles, as well as I tried to configure it manually using a screen dump I took on AsRock Z97 OCF, but it's still no go. What I found is that regardless of what BIOS settings (I tried manual and auto from both profiles) tWR is always set to 8 and I believe it's too tight for me. Unfortunately I don't have any screens with me, I'll add them later this week. 2400C8 works without issues with PSC, 2600 and 2666 work with Samsung and Hynix as well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.