[FS] Golden Pi 2200C7 (K0-8155 air 2720 8-12-8 super tight 1.9V),i7 2600K (5630 Mhz SPI 32M H2O)

1) Golden G.Skill Pi 4gb 2200 Cl7 1.65v K0-8155 - 200 euro

Made in nov 2014

Results on air 22*C ambient , Platform : i5 4670K + ASRock Z87M OC Formula ( on z97 probably runs better)

2666 8-12-8 super tight 1.78V

2720 8-12-8 super tight 1.90V

2) Golden Intel Core i7 2600K - 190 euro

Run at low ambient on watercooling 5630mhz 1.61v Mhz SPI 32M H2O - ASRock Z77 OC Formula

I am from Romania , money you send on paypal or western union, shipping not included.

Here are some photos

Has this chip ever seen cold? What sort of temps did you see under water?

Has this chip ever seen cold? What sort of temps did you see under water?

2600k never on sub zero cooling

the run is made on low ambient -10*C (From what I remember max load temps +15*) at watercooling ( antifreeze + ice)

And a video with PIS

Would you ship to the UK mate?

The mems came from a quad kit according to part number, what happened to the other 2? Are you keeping them, i assume these were from an RMA of an older kit is that right. Any tests done cold, if not no big deal. It seems strange that they do 2666c8 tRDWR, dr, dd at 13-13-11 1.78v, but need 1.9 for 2720 11-11-9. I have several pi kits, as well as a collection of of other high bin psc x (8155/8117/ST etc.) and none of them do 2666 under 1.83ish +v, but a few kits will do 2720 under 1.9v (1.88/1.89/1.9) with the two lowest being 8155pcb and 8117 for the other.

Your kit could be interesting on cold though with the low voltage at 2666, and may only need the 1.9 because of tRCD, and cold should solve that problem

The mems came from a quad kit according to part number, what happened to the other 2? Are you keeping them, i assume these were from an RMA of an older kit is that right. Any tests done cold, if not no big deal. It seems strange that they do 2666c8 tRDWR, dr, dd at 13-13-11 1.78v, but need 1.9 for 2720 11-11-9. I have several pi kits, as well as a collection of of other high bin psc x (8155/8117/ST etc.) and none of them do 2666 under 1.83ish +v, but a few kits will do 2720 under 1.9v (1.88/1.89/1.9) with the two lowest being 8155pcb and 8117 for the other.

 

Your kit could be interesting on cold though with the low voltage at 2666, and may only need the 1.9 because of tRCD, and cold should solve that problem

yes is form quad channel kit but , me i have only 2 stik's (yes is from RMA)

i am an entuziastic , i don't have pot's for ram or LN2 ,

;413781']yes is form quad channel kit but ' date=' me i have only 2 stik's (yes is from RMA)

 

i am an entuziastic , i don't have pot's for ram or LN2 ,[/quote']

 

Cool, let me know what shipping would be. I think expensive though, it was when I bought from Alex@Ro

Funds Sent for 2600K and G Skill PI RAMS

Funds Sent for 2600K and G Skill PI RAMS

ok i recived , monday i will send.