M2R32-MVP - upgrade BIOS - I have new function

Last time I change Bios in my motherboard to 1009 version (latest is 1101 but "beta version"). In my BIOS appear new function:

I. Memory configuration

1.Bank Interlearing auto/disabled

2.Channel Interlearing disabled/auto/address bits 6/ address bits 12/ hash*,XOR of address bits [20:16, 6]/hash*,XOR of address bits [20:16, 9]

3. Memclk tristate C3/ATLVID Disabled/Enabled

4. Memory Hole remapping Disabled/Enabled

5. Unganged mode support Disabled/Enabled

6. Power down enable Disabled/Enabled

7. Power down mode Disabled/Enabled

II. ECC Configuration

ECC mode disabled/basic/good/super/max/user

User:

1. DRAM ECC enable disabled/enabled

2. DRAM scrub redirect disabled/enabled

3. 4bit ECC mode disabled/enabled

4. DRAM BG scrub disabled/40ns/80ns/160ns/320ns/640ns/1,28us/2,56us/5,12us/10,2us/41,0us/81,9us/163,8us/327,7us/655,4us

5. Data cache BG scrub disabled/40ns/80ns/160ns/320ns/640ns/1,28us/2,56us/5,12us/10,2us/41,0us/81,9us/163,8us/327,7us/655,4us

6. L2 cache BG scrub disabled/40ns/80ns/160ns/320ns/640ns/1,28us/2,56us/5,12us/10,2us/41,0us/81,9us/163,8us/327,7us/655,4us

7. L3 cache BG scrub disabled/40ns/80ns/160ns/320ns/640ns/1,28us/2,56us/5,12us/10,2us/41,0us/81,9us/163,8us/327,7us/655,4us

III. DRAM configuration

1. Memory clock mode 200/266/333/400/533

2. DRAM timing mode auto/DCT 0

CAS Latency auto/ 3clk/4clk/5clk/6clk/7clk DH_only

TRCD 3clk/4clk/5clk/6clk

TRP 3clk/4clk/5clk/6clk

TRTP 2clk-4clk/3clk-5clk

TRAS 5clk/6clk/7clk/8clk/9clk/10clk/11clk/12clk/13clk/14clk/15clk/16/clk18clk

TRC 11clk/12clk/13clk/14clk/15clk/16clk/17clk/18clk/19clk/20clk/21clk/22clk/23clk/24clk/25clk/26clk

TWR 3clk/4clk/5clk/6clk

TRRD 2clk/3clk/4clk/5clk

TRWTTO 2clk/3clk/4clk/5clk/6clk/7clk/8clk/9clk

TWRRD 0clk/1clk/2clk/3clk

TWTR 1clk/2clk/3clk

TWRWR 1clk/2clk/3clk

TRDRD 2clk/3clk/4clk/5clk

TRFC0 75ns/105ns/127,5ns/195ns/327,5ns

TRFC1 75ns/105ns/127,5ns/195ns/327,5ns

My RAM is OCZ Platinium rev. 2 PC6400 5.0CL. Can I use this new function to OC memory ? (of course I can change timings but I need some information about other function).