View Full Version : P67/Z68 BIOS collection
kurayami
02-02-2011, 00:56
http://www.gigabyte.com/press-center/news-page.aspx?nid=984
Taipei, Taiwan – February 1, 2011 – GIGABYTE TECHNOLOGY Co., Ltd, a leading manufacturer of motherboards, graphics cards and other computing hardware solutions, today announced that GIGABYTE has been alerted by Intel about a 6 series chipset design error. GIGABYTE is working closely with Intel® to minimize the inconvenience to customers and retail stores with regard to related issues.
A recent statement from Intel indicates that they expect full 6 series chipset volume recovery in April, 2011. GIGABYTE will produce and deliver new motherboards with the updated Intel 6 series chipset when the new chipsets become available. GIGABYTE prides itself in having the highest service quality in the industry, and as such we will resolve this issue with minimal impact on our customers.
Yay, My gigabyte mobo will be replace by new chipset when they comes (maybe in may?) with no service charge. :D
jcniest5
02-05-2011, 05:48
At what vcore should we start being afraid that it would just kill the CPU?
Linuxfan
02-05-2011, 06:43
At what vcore should we start being afraid that it would just kill the CPU?
2V for sure. :p
No really, 1.6 on air or higher or 1.55v Wprime IMO.
1.4v after vdrop (incase ur using mainstream M.B)
on my UD3 i need to set 1.475 on bios in order to achieve 1.4v under linx
Jugger111
02-06-2011, 23:40
PLL Bios V1.8b7 ( E7673IMS.187) for MSI P67A-C45, P67A-C43 and P67S-C43
http://www.msi-forum.de/index.php?page=Thread&threadID=98228
Added:
- P67A-C43 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.8b7): http://91.121.148.119/downloads/BIOS/E7673IMS.187
- P67A-C45 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.8b7): http://91.121.148.119/downloads/BIOS/E7673IMS.187
Added:
- P67A-C43 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.8b7): http://91.121.148.119/downloads/BIOS/E7673IMS.187
- P67A-C45 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.8b7): http://91.121.148.119/downloads/BIOS/E7673IMS.187
tested on my C43 and confirmed by a friend on C45 - latest bios somehow has problems with 2133 on teh RAM. 185 could boot 2133 but not stable, 187 will hang up during boot with "45".
Only improvement I could remark: 1.5 Vcore instead of 1.35
I have 2133 problems with 1.8B11 on gd55. 2133 is not possible any more, event with cl10 it wont boot and cl8 2133 was no problem with older bios.
Tested 1.8B11 a while ago as well. Could get 2133 running with 16GB, but no room for BCLK clocking.
I have 2133 problems with 1.8B11 on gd55. 2133 is not possible any more, event with cl10 it wont boot and cl8 2133 was no problem with older bios. I think it problem with some chip(I've had same trouble with Elpida Hyper).
I tryed and tryed and there is no way boot in WIn with 2133. Same chips could do 2180 8-9-8 on this board and on p8p67 with no problem, before i flashed latest bios. Memory is GSkill Pi 2000mhz cl7, http://img340.imageshack.us/f/newpicture001.jpg/
so is there any way to get subtests to show in 01 on p8p67 motherboards?
Diabolo 80
02-08-2011, 14:13
so is there any way to get subtests to show in 01 on p8p67 motherboards?
3Dmk01 "P8P67 show subtests guide"
1. Run.
2. Push "Online result browser".
3. Push "Show details"
4. Don't PUSH "I agree"
http://img12.imageshack.us/img12/9590/step1gb.jpg (http://img12.imageshack.us/i/step1gb.jpg/)
http://img59.imageshack.us/img59/7084/step2wp.jpg (http://img59.imageshack.us/i/step2wp.jpg/)
http://img341.imageshack.us/img341/8589/step3sp.jpg (http://img341.imageshack.us/i/step3sp.jpg/)
I love you with all my heart ROFL
kurayami
02-09-2011, 07:04
sandy is such a b...ch, it seem to choose ram at 2133
GA-P67A-UD3P - F7a:
http://www.fileden.com/files/2009/12/20/2696817/p67aud3p.7a.zip
GA-P67A-UD7 - F8x (up to 59x multi):
http://www.fileden.com/files/2009/12/20/2696817/p67aud7.8x.zip
- P67A-UD7 (http://hwbot.org/hardware/motherboard/p67a_ud7) (F8x): http://91.121.148.119/downloads/BIOS/p67aud7.f8x
- P67A-UD3P (http://hwbot.org/hardware/motherboard/p67a_ud3p) (F7a): http://91.121.148.119/downloads/BIOS/p67aud3p.f7a
Linuxfan
02-09-2011, 17:22
- P67A-UD7 (http://hwbot.org/hardware/motherboard/p67a_ud7) (F8x): http://91.121.148.119/downloads/BIOS/p67aud7.f8x
- P67A-UD3P (http://hwbot.org/hardware/motherboard/p67a_ud3p) (F7a): http://91.121.148.119/downloads/BIOS/p67aud3p.f7a
Both have higher multi or just UD7?
Problem right now is actually finding the boards. :p
kirbster
02-09-2011, 19:01
I was wondering if BIOS development would continue or not based on the recall.. good to know it continues.
P67A-UD3P (F7a) no pll override(((
Jonesey I7
02-10-2011, 21:16
Hit ctrl+f1 to get additional features with f7a on ud3p.
I was wondering if BIOS development would continue or not based on the recall.. good to know it continues.
It kinda stopped untill Intel said they were starting to ship faulty chips again. I guess the support would've stopped if Intel would not have agreed upon that.
GA-P67A-UD4 - F8b -(with pll override)
http://www.mediafire.com/?xuh694688srw1yb
-up to x59 multi
-11.Feb 11
GA-P67A-UD3P - F7b -(with pll override)
http://www.fileden.com/files/2009/12/20/2696817/p67aud3p.7b.zip
-11.Feb 11
Thanks Stasio!
Added:
- P67A-UD4 (http://hwbot.org/hardware/motherboard/p67a_ud4) (F8b): http://91.121.148.119/downloads/BIOS/p67aud4.f8b
GA-P67A-UD3P - F7b is also released above.
Cool! Thanks for the heads up ... wouldn't have seen it :)
- P67A-UD3P (http://hwbot.org/hardware/motherboard/p67a_ud3p) (F7b): http://91.121.148.119/downloads/BIOS/p67aud3p.f7b
- Maximus IV Extreme (http://hwbot.org/hardware/motherboard/maximus_iv_extreme) (1052): http://91.121.148.119/downloads/BIOS/MaximusIV-Extreme-ASUS-1052.ROM
Changelog
Fixed if select By number of active cores mode,
CPU ratio & BCLK all changed , after reset it will jump back to all cores mode
Another M4E bios
- Maximus IV Extreme (http://hwbot.org/hardware/motherboard/maximus_iv_extreme) (1090): http://91.121.148.119/downloads/BIOS/MaximusIV-Extreme-ASUS-1090.ROM
GA-P67A-UD3 - F7a -(with pll override)
http://www.fileden.com/files/2009/12/20/2696817/p67aud3.7a.zip
Thanks!
- P67A-UD3 (http://hwbot.org/hardware/motherboard/p67a_ud3) (F7a): http://91.121.148.119/downloads/BIOS/p67aud3.f7a
:( no new UD5 with pll override for a while
*Posted @ http://hardforum.com//showthread.php?t=1578865
P8P67 Deluxe / Pro / EVO / Standard - 1302 Beta -
Change Log -
- Improved OC performance using Multipliers or Auto Overclocking
- Improved BCLK and DRAM OC capabilities when enabling the “Internal PLL Overvoltage” option in BIOS. Note - Sleep/Hibernate will not operate properly due to Intel Specs.
- Improved USB performance, Improved P67 XMP profile compatibility (please note, memory with X58/P55 XMP profiles will generally work but is not optimized for P67 and will usually cause problems when overclocking in several cases)
- Per Core Save Fixed
- Disable/Enable BT
- Minor Bug Fixes including new Auto Rules for C-States (C3/C6) when overclocking.
Beta - UEFI 1302 - Pro
http://www.mediafire.com/?p6vg0s9mr2bmk1j
Beta - UEFI 1302 - Standard
http://www.mediafire.com/?dbjsdjio7jh3kzt
Beta - UEFI 1302 - EVO
http://www.mediafire.com/?lgdbuofxxbqevjp
Beta - UEFI 1302 - Deluxe
http://www.mediafire.com/?7y2pkppe9z9h7m6
P8P67 LE UEFI 1003
Change Log -
- Removes full reset at POST (double post) on cold boot or auto overclocking routine.
- Improved OC performance using Auto Overclocking
- Improved BCLK and DRAM OC capabilities when enabling the “Internal PLL Overvoltage” option in BIOS.
- Minor Bug Fixes including Auto Rule for C3, C6 being disabled when overclocking and improved USB compatibility.
- Enabling Internal PLL Voltage will still cause resume/hibernate issues (Intel related) but we are working with Intel on any potential workarounds.
UEFI 1003 - http://www.mediafire.com/file/zvx227...-ASUS-1003.rar
UEFI 1003 -
http://www.mediafire.com/file/zvx22714vd7g4t7/P8P67-LE-ASUS-1003.rar
Thanks to TASOS and Stasio!
- P8P67 (http://hwbot.org/hardware/motherboard/p8p67)(1302): http://91.121.148.119/downloads/BIOS/P8P67-ASUS-1302.ROM
- P8P67 Evo (http://hwbot.org/hardware/motherboard/p8p67_evo) (1302): http://91.121.148.119/downloads/BIOS/P8P67-EVO-ASUS-1302.ROM
- P8P67 Deluxe (http://hwbot.org/hardware/motherboard/p8p67_deluxe) (1302): http://91.121.148.119/downloads/BIOS/P8P67-DELUXE-ASUS-1302.ROM
- P8P67 Le (http://hwbot.org/hardware/motherboard/p8p67_le) (1003): http://91.121.148.119/downloads/BIOS/P8P67-LE-ASUS-1003.ROM
- P8P67 Pro (http://hwbot.org/hardware/motherboard/p8p67_pro) (1302): http://91.121.148.119/downloads/BIOS/P8P67-PRO-ASUS-1302.ROM
733MB of P67 BIOS :p
- P8P67 WS Revolution (http://hwbot.org/hardware/motherboard/p8p67_ws_revolution) (1007): http://91.121.148.119/downloads/BIOS/P8P67-WS-REVOLUTION-ASUS-1007-SLP.rom
- P8P67-M (http://hwbot.org/hardware/motherboard/p8p67_m) (0503): http://91.121.148.119/downloads/BIOS/P8P67-M-ASUS-0503.ROM
- P8P67-M Pro (http://hwbot.org/hardware/motherboard/p8p67_m_pro) (0601): http://91.121.148.119/downloads/BIOS/P8P67-M-PRO-ASUS-0601.ROM
Thanks to TASOS and Stasio!
- P8P67 (http://hwbot.org/hardware/motherboard/p8p67)(1302): http://91.121.148.119/downloads/BIOS/P8P67-ASUS-1302.ROM
- P8P67 Evo (http://hwbot.org/hardware/motherboard/p8p67_evo) (1302): http://91.121.148.119/downloads/BIOS/P8P67-EVO-ASUS-1302.ROM
- P8P67 Deluxe (http://hwbot.org/hardware/motherboard/p8p67_deluxe) (1302): http://91.121.148.119/downloads/BIOS/P8P67-DELUXE-ASUS-1302.ROM
- P8P67 Le (http://hwbot.org/hardware/motherboard/p8p67_le) (1003):
http://www.mediafire.com/file/zvx22714vd7g4t7/P8P67-LE-ASUS-1003.rar
- P8P67 Pro (http://hwbot.org/hardware/motherboard/p8p67_pro) (1302): http://91.121.148.119/downloads/BIOS/P8P67-PRO-ASUS-1302.ROM
Please change for P8P67 Le.
Oh, right!
Thanks for the heads up.
Linuxfan
02-17-2011, 04:57
MM, links for P8P67-M board are broken.
Just fixed the link for the P8P67-M
We have new official UEFI releases for the P8P67 Standard/Pro/EVO/Deluxe/Sabertooth boards today. You will not be able to roll back to an older UEFI after this update as it contains new firmware and B3 stepping compatibility. Additional UEFI releases for the balance of our P67/H67 product lineup will be released in the near future after qualification testing is complete (H67/P67M/WS). The next official UEFI update (13xx series) in the near future will feature additional user enhancements, USB drift fix and updated Marvell/Intel MEI controller firmware. I highly suggest a Clear CMOS event after loading the updated UEFI and then entering UEFI to reset your custom settings. JJ and I will have updated information on memory setups and SSD testing over the course of the next week.
1. Reset your UEFI to Optimized Defaults, reboot, enter UEFI and then flash to the new UEFI build.
2. After flash and restart, shutdown the system before you enter Windows/Linux.
3. Remover the power cord from the power supply, wait thirty seconds, press Power On button to clear any remaining charge, clear CMOS for five seconds, reattach the power cord, power on the system, enter UEFI, set to Optimized Defaults, save and exit.
4. Enter UEFI, set your system to customized settings based on your system configuration (RAID, OC, etc), save and exit.
Note - These UEFI releases will be on our FTP and Support Sites shortly.
P8P67 Deluxe / Pro / EVO / Standard / Sabertooth - 1305 -
Change Log -
- Improved OC performance using Multipliers or Auto Overclocking
- Improved BCLK and DRAM OC capabilities when enabling the “Internal PLL Overvoltage” option in BIOS. Note - Sleep/Hibernate will not operate properly due to Intel Specs.
- Improved USB performance, Improved P67 XMP profile compatibility (please note, memory with X58/P55 XMP profiles will generally work but is not optimized for P67 and will usually cause problems when overclocking in several cases)
- Per Core Save Fixed
- Disable/Enable BT
- Minor Bug Fixes including new Auto Rules for C-States (C3/C6) when overclocking. If you are overclocking, C-States will be disabled for enhanced performance.
- Intel RAID will not support bootable volumes greater than 2.2TB yet, Intel plans a firmware update shortly to allow this operation. AHCI and IDE are not affected.
- Enhanced AI Suite II compatibility
UEFI 1305 - Pro
http://www.mediafire.com/file/f9ujd5kn3l8kllc/P8P67-PRO-ASUS-1305.rar
UEFI 1305 - Standard
http://www.mediafire.com/file/74uqtkkctbk44jv/P8P67-ASUS-1305.rar
UEFI 1305 - EVO
http://www.mediafire.com/file/uhyxd79ihfhtl58/P8P67-EVO-ASUS-1305.rar
UEFI 1305 - Deluxe
http://www.mediafire.com/file/k84d6d5dz6e17e0/P8P67-DELUXE-ASUS-1305.rar
UEFI 1305 - Sabertooth
http://www.mediafire.com/file/dn39uvqj5ciy9cl/SABERTOOTH-P67-ASUS-1305.rar
hokiealumnus
02-18-2011, 05:26
Will they work with the earlier PCH stepping?
I re-write from stasio's quote in bold , just in case somebody havent noticed.
P8P67 Deluxe / Pro / EVO / Standard / Sabertooth - 1305 -
You will not be able to roll back to an older UEFI after this update ....
//
P.S.
I also propose to take down all links from 1302 beta bios ... cause it was nothing but troubles for the majority of systems that flashed it.
Uploaded to HWBOT server. Thanks TASOS and Stasio!
- P8P67 (http://hwbot.org/hardware/motherboard/p8p67)(1305): http://91.121.148.119/downloads/BIOS/P8P67-ASUS-1305.ROM
- P8P67 Evo (http://hwbot.org/hardware/motherboard/p8p67_evo) (1305): http://91.121.148.119/downloads/BIOS/P8P67-EVO-ASUS-1305.ROM
- P8P67 Deluxe (http://hwbot.org/hardware/motherboard/p8p67_deluxe) (1305): http://91.121.148.119/downloads/BIOS/P8P67-DELUXE-ASUS-1305.ROM
- P8P67 Pro (http://hwbot.org/hardware/motherboard/p8p67_pro) (1305): http://91.121.148.119/downloads/BIOS/P8P67-PRO-ASUS-1305.ROM
- Sabertooth P67 (http://hwbot.org/hardware/motherboard/sabertooth_p67) (1305): http://91.121.148.119/downloads/BIOS/SABERTOOTH-P67-ASUS-1305.ROM
Change Log -
- Improved OC performance using Multipliers or Auto Overclocking
- Improved BCLK and DRAM OC capabilities when enabling the “Internal PLL Overvoltage” option in BIOS. Note - Sleep/Hibernate will not operate properly due to Intel Specs.
- Improved USB performance, Improved P67 XMP profile compatibility (please note, memory with X58/P55 XMP profiles will generally work but is not optimized for P67 and will usually cause problems when overclocking in several cases)
- Per Core Save Fixed
- Disable/Enable BT
- Minor Bug Fixes including new Auto Rules for C-States (C3/C6) when overclocking. If you are overclocking, C-States will be disabled for enhanced performance.
- Intel RAID will not support bootable volumes greater than 2.2TB yet, Intel plans a firmware update shortly to allow this operation. AHCI and IDE are not affected.
- Enhanced AI Suite II compatibility
You will not be able to roll back to an older UEFI after this update ....
Leeghoofd
02-18-2011, 10:34
Uploaded to HWBOT server. Thanks TASOS and Stasio!
- P8P67 (http://hwbot.org/hardware/motherboard/p8p67)(1305): http://91.121.148.119/downloads/BIOS/P8P67-ASUS-1305.ROM
- P8P67 Evo (http://hwbot.org/hardware/motherboard/p8p67_evo) (1305): http://91.121.148.119/downloads/BIOS/P8P67-EVO-ASUS-1305.ROM
- P8P67 Deluxe (http://hwbot.org/hardware/motherboard/p8p67_deluxe) (1305): http://91.121.148.119/downloads/BIOS/P8P67-DELUXE-ASUS-1305.ROM
- P8P67 Pro (http://hwbot.org/hardware/motherboard/p8p67_pro) (1305): http://91.121.148.119/downloads/BIOS/P8P67-PRO-ASUS-1305.ROM
- Sabertooth P67 (http://hwbot.org/hardware/motherboard/sabertooth_p67) (1305): http://91.121.148.119/downloads/BIOS/SABERTOOTH-P67-ASUS-1305.ROM
Plz make sure you follow the correct flash procedure ( as Stasio already mentioned) or get stuck with my the double post bug again
1. Reset your UEFI to Optimized Defaults, reboot, enter UEFI and then flash to the new UEFI build.
2. After flash and restart, shutdown the system before you enter Windows/Linux.
3. Remover the power cord from the power supply, wait thirty seconds, press Power On button to clear any remaining charge, clear CMOS for five seconds, reattach the power cord, power on the system, enter UEFI, set to Optimized Defaults, save and exit.
4. Enter UEFI, set your system to customized settings based on your system configuration (RAID, OC, etc), save and exit.
Especially the cmos reset is important, as my sabretooth was not posting ( again), after the cmos reset it finally works as it should...
- Maximus IV Extreme (http://hwbot.org/hardware/motherboard/maximus_iv_extreme) (1092): http://91.121.148.119/downloads/BIOS/MaximusIV-Extreme-ASUS-1092.ROM
Shows CPU Target frequency at boot
I have tried it, but I can't get Hypers to work at 2133MHz... With 0950 I can bench 2133 7-7-7 at 4.5GHz, but at 5GHz can't get even a loop of 8m/32m
Jugger111
02-19-2011, 19:48
E7673IMS.189
(1.8b9)
for both - MSI P67A-C43 and MSI P67A-C45
http://www.msi-forum.de/index.php?page=Thread&postID=772832#post772832
- P67A-C43 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.8b9): http://91.121.148.119/downloads/BIOS/E7673IMS.189
- P67A-C45 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.8b9): http://91.121.148.119/downloads/BIOS/E7673IMS.189
01. Fixed OC Genie can't fix cpu ratio on some board.
02. Fixed EUP 2013 cannot disabled.
03. Add Backup NVRAM block when MFlash/F75221 update BIOS
(if FAULT_TOLERANT_NVRAM_UPDATE= ON)
04. Fix CPU status in CPU SPEC always show Unlock
05. Update GPower module V0.08/V0.09
-Follow H/W recommend to modify GPower default setting.(CPU Phase default:Intel SVID)
-Fix no full phase issue.
-Add token "Patch_VCore_Step".
06. Modification for JMB362C
-Option rom,jmb362_C_1.07.26.bin
-Add AtaCtlrSmm module part to patch AHCI mode install OS needs load driver
07. Modify setup Copyright string (Copyright (C) 2011)
08. Update 4.6.4_Intel_CPT_038
09. Update SandyBridge_A;4.6.4_Intel_SNB_035
10. Update MSI-P67MRC-V1.40/V1.50
-Add Low Memory solution.
-Update Memory Initialize Reference Code to version:1.1.1.01
11. Update FITC and ME FW to 7.0.4.1197.
12. Adjust CPU Vcore range by BOM.
---------
1. Modify the way of getting BIOS ver data in setup and Post.
2. Fill in the ACPI table's OEMID&OEM TABLE ID with the SLIC's.
3. Fix current cpu ratio show incorrect when adjust cpu ratio in OS enabled.
Blackoberst
02-21-2011, 12:13
Latest BETA Release E7681IMS.18D [v1.8b13].
http://www.mediafire.com/?64kqqx2bgte9h1x
Change log:
E7681IMS.18B ---> E7681IMS.18D
- Update FITC and ME FW to 7.0.4.1197.
- Fixed EUP 2013 cannot disabled.
- Add Backup NVRAM block when MFlash/F75221 update BIOS (if FAULT_TOLERANT_NVRAM_UPDATE= ON)
- Fix CPU status in CPU SPEC always show Unlock
- Update GPower module V0.08/V0.09
---- Follow H/W recommend to modify GPower default setting.(CPU Phase default:Intel SVID)
---- Fix no full phase issue.
---- Add token "Patch_VCore_Step".
- Update MSI-P67MRC-V1.40/V1.50
---- Add Low Memory solution.
---- Update Memory Initialize Reference Code to version:1.1.1.01
- Modify setup Copyright string (Copyright (C) 2011)
- Update 4.6.4_Intel_CPT_038
- Update SandyBridge_A;4.6.4_Intel_SNB_035
- Modify the way of getting BIOS ver data in setup and Post.
- Fill in the ACPI table's OEMID&OEM TABLE ID with the SLIC's.
- Fix current cpu ratio show incorrect when adjust cpu ratio in OS enabled.
Thanks Blackoberst!
- P67A-GD53 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.8b13): http://91.121.148.119/downloads/BIOS/E7681IMS.18D
- P67A-GD55 (http://hwbot.org/hardware/motherboard/p67a_gd55) (1.8b13): http://91.121.148.119/downloads/BIOS/E7681IMS.18D
- P67A-GD65 (http://hwbot.org/hardware/motherboard/p67a_gd65) (1.8b13): http://91.121.148.119/downloads/BIOS/E7681IMS.18D
- Update FITC and ME FW to 7.0.4.1197.
- Fixed EUP 2013 cannot disabled.
- Add Backup NVRAM block when MFlash/F75221 update BIOS (if FAULT_TOLERANT_NVRAM_UPDATE= ON)
- Fix CPU status in CPU SPEC always show Unlock
- Update GPower module V0.08/V0.09
---- Follow H/W recommend to modify GPower default setting.(CPU Phase default:Intel SVID)
---- Fix no full phase issue.
---- Add token "Patch_VCore_Step".
- Update MSI-P67MRC-V1.40/V1.50
---- Add Low Memory solution.
---- Update Memory Initialize Reference Code to version:1.1.1.01
- Modify setup Copyright string (Copyright (C) 2011)
- Update 4.6.4_Intel_CPT_038
- Update SandyBridge_A;4.6.4_Intel_SNB_035
- Modify the way of getting BIOS ver data in setup and Post.
- Fill in the ACPI table's OEMID&OEM TABLE ID with the SLIC's.
- Fix current cpu ratio show incorrect when adjust cpu ratio in OS enabled.
Just added:
- Pure Black P67 (http://hwbot.org/hardware/motherboard/pure_black_p67_hydra) (1.0): http://91.121.148.119/downloads/BIOS/1APHE036.ROM (no pll override?)
Can someone confirm if pll override is present or not?
BenchBros
02-21-2011, 13:52
Does someone have news about the ASRock Fatality Board?
The 1.50 BIOS just allows 1.5V Max. VCore
the board is great but this is to low...
Any news on Biostar bios? :)
The 1.50 BIOS just allows 1.5V Max. VCore
You must flash this UEFI: http://www.asrock.com/mb/download.asp?Model=Fatal1ty%20P67%20Professional&o=Beta
I changed from my Fatal1ty to an Asus P8P67 Evo, the Fatal1ty has many non-reproduceable
bluescreens.
Jugger111
02-21-2011, 23:12
E7673IMS.180
(V1.8 final)
for both - MSI P67A-C43 and MSI P67A-C45
Changelog:
- Update NVRMA firmware version.
- Improved memory compatibility.
- Support PC Doctor RTC tool.
- Add F1/F4/F5 function key in BIOS main page.
dl:
http://www.msi.com/service/download/bios-16069.html
- P67A-C43 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.8): http://91.121.148.119/downloads/BIOS/E7673IMS.180
- P67A-C45 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.8): http://91.121.148.119/downloads/BIOS/E7673IMS.180
GA-P67A-UD4 - F8f (http://oldforum.gigabyte.de/forumdownload/betabios/20110218/p67aud4.zip)
-fix "Vcore + DVID + cold start"
-fix Vdimm
Date: 18.02.2011
Thank Stasio!
- P67A-UD4 (http://hwbot.org/hardware/motherboard/p67a_ud4) (F8f): http://91.121.148.119/downloads/BIOS/p67aud4.f8f
hey
i tried to flash the 0601 bios for the P8P67-M Pro, but the ez flash say that this file isn't a efi bios and so i can't flash it. is that true or it's just a bug?
on the asus homepage the newest file is just 0413 and i don't know if it support the pll thing...
Maximus IV Extreme -(Official BIOS 1101)
ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...e-ASUS-1101.zip (ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155/MAXIMUS_IV_EXTREME/MaximusIV-Extreme-ASUS-1101.zip)
Maximus IV Extreme -(Official BIOS 1101)
ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...e-ASUS-1101.zip (ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155/MAXIMUS_IV_EXTREME/MaximusIV-Extreme-ASUS-1101.zip)
any change-log?
any change-log?
Maximus IV Extreme - 1101 Change Log -
- Improved OC performance using Multipliers or Auto Overclocking
- Improved BCLK and DRAM OC capabilities when enabling the “Internal PLL Overvoltage” option in BIOS. Note - Sleep/Hibernate will not operate properly due to Intel Specs.
- Improved Memory Profiles and Performance (Elpida Hyper owners, please use Red Slots for best performance, CFG Lock to Disable should improve SuperPI times)
- Per Core Save Fixed
- Minor Bug Fixes
- Auto Voltage Resume Fix
Please note - Enabling Memory Bandwidth Boost will tighten memory subtimings and can cause non-post conditions with certain memory kits. It is currently optimized for Elpida Hyper and High Speed PSC ICs. This setting will be optimized with additional memory profiles over time and we are working on "best" settings for mainstream kits now. I recommend unless you are trying to set SuperPI records with the above kits that most users leave this option disabled. It is meant for "on the edge" overclocking.
- P67A-GD65 (http://hwbot.org/hardware/motherboard/p67a_gd65) (1.9b1): http://91.121.148.119/downloads/BIOS/E7681IMS.191
- P67A-GD55 (http://hwbot.org/hardware/motherboard/p67a_gd55) (1.9b1): http://91.121.148.119/downloads/BIOS/E7681IMS.191
- P67A-GD53 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.9b1): http://91.121.148.119/downloads/BIOS/E7681IMS.191
- Maximus IV Extreme (http://hwbot.org/hardware/motherboard/maximus_iv_extreme) (1101): http://91.121.148.119/downloads/BIOS/MaximusIV-Extreme-ASUS-1101.ROM
New Gigabyte beta BIOS:
GA-P67A-UD7 - F8f (http://www.fileden.com/files/2009/12/20/2696817/p67aud7.8f.zip)
GA-P67A-UD5 - F7e (http://www.fileden.com/files/2009/12/20/2696817/P67AUD5.7e.zip)
GA-P67A-UD4 - F8i (http://www.fileden.com/files/2009/12/20/2696817/p67aud4.8i.zip)
GA-P67A-UD3 - F7e (http://www.fileden.com/files/2009/12/20/2696817/p67aud3.7e.zip)
GA-P67A-UD3P - F7f (http://www.fileden.com/files/2009/12/20/2696817/p67aud3p.7f.zip)
GA-P67A-UD3R - F8b (http://www.fileden.com/files/2009/12/20/2696817/p67aud3r.8b.zip)
Thanks to Stasio for posting!
- P67A-UD3 (http://hwbot.org/hardware/motherboard/p67a_ud3) (F7e): http://91.121.148.119/downloads/BIOS/p67aud3.f7e
- P67A-UD3P (http://hwbot.org/hardware/motherboard/p67a_ud3p) (F7f): http://91.121.148.119/downloads/BIOS/p67aud3p.f7f
- P67A-UD3R (http://hwbot.org/hardware/motherboard/p67a_ud3r) (F8b): http://91.121.148.119/downloads/BIOS/p67aud3r.f8b
- P67A-UD4 (http://hwbot.org/hardware/motherboard/p67a_ud4) (F8i): http://91.121.148.119/downloads/BIOS/p67aud4.f8i
- P67A-UD5 (http://hwbot.org/hardware/motherboard/p67a_ud5) (F7e): http://91.121.148.119/downloads/BIOS/P67aud5.f7e
- P67A-UD7 (http://hwbot.org/hardware/motherboard/p67a_ud7) (F8f): http://91.121.148.119/downloads/BIOS/p67aud7.f8f
Wohoo! Finally UD5! Thanks Big M :D
Jugger111
03-05-2011, 19:37
For MSI P67A-C43 and MSI P67A-C43
V1.9b2 http://www.msi-forum.de/index.php?page=Thread&postID=773984#post773984
- P8P67 WS Revolution (http://hwbot.org/hardware/motherboard/p8p67_ws_revolution) (1103): http://91.121.148.119/downloads/BIOS/P8P67-WS-REVOLUTION-ASUS-1103.rom
reggiesanchez
03-06-2011, 18:02
using the asus p8p67 le bios 1003 is GREAT pretty sure I can max out this humble board with it with previous bios could not even pass 4.6 now I can boot in @52 and still room to raise the bclk in os. Not stable there but thats another story. Thanks for your help/info
Oops! Overlooked these two:
- P67A-C43 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.9b2): http://91.121.148.119/downloads/BIOS/E7673IMS.192
- P67A-C45 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.9b2): http://91.121.148.119/downloads/BIOS/E7673IMS.192
*looks at your signature*
Okay ... :p
Jugger111
03-07-2011, 06:01
buy gigabyte ud7 or asus p8
eat 18-20 of useless mosfets instead of cornflakes :D
it works too @ 5,4GHZ :D
for MSI P67A-C43 and MSI P67A-C45
Bios V1.9b3
http://www.msi-forum.de/index.php?page=Thread&postID=774329#post774329
any oc-ram fixes, vcore-adjust
@sof
you win hwluxx-superpi-challenge with the little c43 :) ?
last day@ challenge new bios with oc-ram fixes for c43 and none for gd53-65 :D lol ?
P8P67 Pro --> dead
Maximus IV Extreme --> dead
C43 --> my only board alive :p
They stopped the contest due to the chipset issues. And I know at least 2 guys with a better time ;)
@Massman mirror please! :D
SoF's wish is my command
- P67A-C45 (http://hwbot.org/hardware/motherboard/p67a_c45) (1.9b3): http://91.121.148.119/downloads/BIOS/E7673IMS.193
- P67A-C43 (http://hwbot.org/hardware/motherboard/p67a_c43) (1.9b3): http://91.121.148.119/downloads/BIOS/E7673IMS.193
- P67A-S43 (http://hwbot.org/hardware/motherboard/p67a_s43) (1.9b3): http://91.121.148.119/downloads/BIOS/E7673IMS.193
E7673IMS.180 ---> E7673IMS.191
- Fix G-skill F3-19200CL9D-4GBPIS unstable if XMP enabled.
- Fix show single channel message in post.
- Adjust cpu voltage range for P67 BOM.
- Fixed that will hang D4 when connect blu-ray DVD.
- Fix memory(Corsair CMG6GX3M3A2000C7 4DIMM) XMP Enabled, the system hang 45.
- Fix memory(G.skill F3-16000CL6T-6GBPIS)set frequency:1866 timming:6-9-6-24 voltage:1.65, the system keep rebooting.
- Adjust cpu frequecy in cpuz group.
- Update lan Option to 2.38.
- Update FastBoot module to fix S4 issue.
- Fix G-Skill F3-17000CL9Q-16GBXLD boot fail when XMP enabled.
E7673IMS.191 ---> E7673IMS.193
- Update CSM Amilegacy16.bin for fix System cannot enter Win7 32bit after installing Comback recover software(SATA3.0 PORT).
- Reduce bios boot time.
- add "Intel VT-D Tech" in OC\CPU Features page.
- support to gray the VT-d item of setup when the VT-d feature of the platform is disabled.
- Fix APS Mode fail when use 2600K CPU.
- adjust USB3.0 performance.
- Update the Sandybridge show CPU and Dram Frequency Code.
- Fix mflash function fail.
- Adjust CPU voltage.
Also added P67S-C43 and fixed the links of the MSI boards.
Any news regarding biostar new bios for tp67xe?It's kinda frustrating every manufacturer release something and guys from biostar nothing???There are some things to patch here and there :D
thanks massman!
damn msi fooled me another time ^^ "Adjust CPU voltage" is not what I hoped - new bios still 1.35V max (even the tooltip says "we do not recommend to set voltage past 1.4" lol ) ... vmod anyone? -.-
€: but actually they seem to finally have got the trick with RAM - can run my ST kit 1088 8-10-8 finally...I would love to continue testing for the msi challenge but I sold the only CPU doing 5 GHZ at 1.35V to neoforce :p the chips I have here that run 5.5+ can't handle low voltz ^^
€˛: somebody just told me C45 can give up to 1.52V...sounds strange to me as it is the same bios basically ^^
- Maximus IV Extreme (http://hwbot.org/hardware/motherboard/maximus_iv_extreme) (1204): http://91.121.148.119/downloads/BIOS/MaximusIV-Extreme-ASUS-1204.ROM
- P8P67-M Pro (http://hwbot.org/hardware/motherboard/p8p67_m_pro) (0703): http://91.121.148.119/downloads/BIOS/P8P67-M-PRO-ASUS-0703.ROM
- P8P67-M (http://hwbot.org/hardware/motherboard/p8p67_m) (0702): http://91.121.148.119/downloads/BIOS/P8P67-M-ASUS-0702.ROM
- Maximus IV Extreme (http://hwbot.org/hardware/motherboard/maximus_iv_extreme) (1204): http://91.121.148.119/downloads/BIOS/MaximusIV-Extreme-ASUS-1204.ROM
- P8P67-M Pro (http://hwbot.org/hardware/motherboard/p8p67_m_pro) (0703): http://91.121.148.119/downloads/BIOS/P8P67-M-PRO-ASUS-0703.ROM
- P8P67-M (http://hwbot.org/hardware/motherboard/p8p67_m) (0702): http://91.121.148.119/downloads/BIOS/P8P67-M-ASUS-0702.ROM
Any info??? Thanks!
- Maximus IV Extreme (http://hwbot.org/hardware/motherboard/maximus_iv_extreme) (1298): http://91.121.148.119/downloads/BIOS/MaximusIV-Extreme-ASUS-1298.ROM
I cant believe , we forgot the Intel Burrage board !!!
There's bios version 1900 @ intel site since 10/02/2011
Intel DP67BG BG1900P.BIO
http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/19801/eng/BG1900P.BIO&lang=eng&Dwnldid=19801&ProductID=3273
Sapphire
- Pure Black P67 (http://hwbot.org/hardware/motherboard/pure_black_p67_hydra) (1.0): http://91.121.148.119/downloads/BIOS/1APHE036.ROM (no pll override?)
NO pll override in this bios.
prooflink on modlabs.net (http://www.modlabs.net/gallery/image/5346)
Blackoberst
03-14-2011, 12:03
New BIOS for MSI P67A GD65/GD55/GD53 A7681IMS.1A1 = v1.10b1 [Release-Date: 03/09/2011]
Change log:
- Update CSM Amilegacy16.bin file for fix System cannot enter Win7 32bit after installing Comback recover software(SATA3.0 PORT).
- Add USB3.0 support in legacy mode.
- Fix Multi BIOS watch dog fail in DXE issue.
- Fixed coding error.
- Fix usb mouse(steelseries 62001/Wintek.WM700)Movement Issue and usb mouse (ROCCAT.Kova) can not be detected well in UEFI bios
http://www.mediafire.com/?0ad0dcndkm77tsq
I cant believe , we forgot the Intel Burrage board !!!
There's bios version 1900 @ intel site since 10/02/2011
Intel DP67BG BG1900P.BIO
http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/19801/eng/BG1900P.BIO&lang=eng&Dwnldid=19801&ProductID=3273
Does it have PLL override?
NO pll override in this bios.
prooflink on modlabs.net (http://www.modlabs.net/gallery/image/5346)
Maybe it's always enabled and just not available as option? Can you clock your chip >5GHz?
New BIOS for MSI P67A GD65/GD55/GD53 A7681IMS.1A1 = v1.10b1 [Release-Date: 03/09/2011]
Change log:
http://www.mediafire.com/?0ad0dcndkm77tsq
Thanks!
Any word on the GD80 or Marshall BIOSes?
- DP67BG (http://hwbot.org/hardware/motherboard/dp67bg)(1900P): http://91.121.148.119/downloads/BIOS/BG1900P.BIO
- P67A-GD53 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.10b1): http://91.121.148.119/downloads/BIOS/E7681IMS.1A1
- P67A-GD55 (http://hwbot.org/hardware/motherboard/p67a_gd55) (1.10b1): http://91.121.148.119/downloads/BIOS/E7681IMS.1A1
- P67A-GD65 (http://hwbot.org/hardware/motherboard/p67a_gd65) (1.10b1): http://91.121.148.119/downloads/BIOS/E7681IMS.1A1
Blackoberst
03-14-2011, 13:04
Thanks!
Any word on the GD80 or Marshall BIOSes?
There are some versions (E7672IMS.A0E, E7672IMS.A0O, E7672IMS.A0Q) for the GD 80 on the MSI forum. Should I upload them here?
Does it have PLL override?
Yes
Nik@_N0body
03-15-2011, 00:35
New BIOS for MSI P67A GD65/GD55/GD53 A7681IMS.1A1 = v1.10b1 [Release-Date: 03/09/2011]
Change log:
http://www.mediafire.com/?0ad0dcndkm77tsq
- DP67BG (http://hwbot.org/hardware/motherboard/dp67bg)(1900P): http://91.121.148.119/downloads/BIOS/BG1900P.BIO
- P67A-GD53 (http://hwbot.org/hardware/motherboard/p67a_gd53) (1.10b1): http://91.121.148.119/downloads/BIOS/E7681IMS.1A1
- P67A-GD55 (http://hwbot.org/hardware/motherboard/p67a_gd55) (1.10b1): http://91.121.148.119/downloads/BIOS/E7681IMS.1A1
- P67A-GD65 (http://hwbot.org/hardware/motherboard/p67a_gd65) (1.10b1): http://91.121.148.119/downloads/BIOS/E7681IMS.1A1
Hey, I'd like to warn you about this version. It seems to have a bug. My keyboard with 2 USB cables (for on-keyboard USB connections) no longer works in the UEFI. I tried a standard Compaq keyboards with just 1 cable and it worked perfectly. I believe someone messed up while trying to fix USB support.
Also, another OCN member borked his board with it and is now unable to even reach the UEFI to reflash.
http://www.overclock.net/intel-motherboards/963798-msi-p67a-gd55-review-oc-guide-2.html#post12732304
There are some versions (E7672IMS.A0E, E7672IMS.A0O, E7672IMS.A0Q) for the GD 80 on the MSI forum. Should I upload them here?
Can you send me the link of the thread? I can't find them at all :(
Blackoberst
03-15-2011, 09:02
Here is the link: http://forum-en.msi.com/index.php?topic=146444.0
Oh, can you re-host them (so I can re-host them)?
I'm only regged at the German MSI forum ... :(
Blackoberst
03-15-2011, 10:17
Here you go:
http://www.mediafire.com/?8be7h57dv7bm2a5
http://www.mediafire.com/?qm2qxxlexli3ibw
http://www.mediafire.com/?qm2qxxlexli3ibw
Change log:
E7672IMS.A0E -> E7672IMS.A0Q
- Update code base on EIIAAICP.104.
- Fix current cpu ratio show incorrect when adjust cpu ratio in OS enabled.
- Fix Current DRAM Voltage show lower 0.02V.
- Update to GPower 0.09
- Reflash PostMsg module (support EMSBIU).
- Fix some blu-ray DVD hang B4.
- Modify some warning information color to red.
- Hide com port.
- Fix a Password issue.
- Fix CPU Status issue.
- Update in MFlash, F75221.
- Update M12206A7_00000012.PDB.
- Fix OC Genie enabled memory voltage lower than 1.666V.
- Fix PC Doctor RTC test fail.
- Fixed get CPU BaseClk value error issue;
- Add F1,F4,F5 hotkey Function in MainPage & SettingPage.
- Add CPU Brand name in CPUZ.
- Reset SIO GPIO40.
- Delete a error in Green Power page.
- Modify the cpu Ratio can't change sometimes when Enabled the OC Genie Button.
- Add AP Controller internal CPU PLL OverVoltage Function;
- Modify BCLK setp value to 0.1MHz.
- Patch some Intel ME issue
- Update Lan option rom to ver 2.38.
- Update F75221 V0.07.
- Fix USB keyboard delay too long issue.
- Update CPUZ module
- Fix memory(Corsair CMG6GX3M3A2000C7 4DIMM) XMP Enabled, the system hang 45
- Fix memory(G.skill F3-16000CL6T-6GBPIS)set frequency:1866 timming:6-9-6-24 voltage:1.65, the system keep rebooting.
- Fix G-Skill F3-17000CL9Q-16GBXLD boot fail when XMP enabled.
- Fix recovery function Fail issue.
- Fix some USB port can not works if XHCI enabled.
- Fix dual BIOS function Fail issue.
- Enhance USB 3.0 Performance.
- Update F75221 V0.08.
- Update amilegacy16.bin
Thanks, but you posted one link twice (I think A0Q is missing). Any idea on the actual bios version? With the other bioses it's easy to understand, but with these ... A0Q?
Re-hosted these two BIOSes. Can anyone provide any feedback on the version and whether or not there's PLL override available?
- P67A-GD80 (http://hwbot.org/hardware/motherboard/p67a_gd80) (A0O): http://91.121.148.119/downloads/BIOS/E7672IMS.A0O
- P67A-GD80 (http://hwbot.org/hardware/motherboard/p67a_gd80) (A0E): http://91.121.148.119/downloads/BIOS/E7672IMS.A0E
Gigabyte PH67-UD3-B3-f3b
http://rapidshare.com/files/452893009/ph67aud3b3.f3b
Gigabyte P67-UD4-B3-f3b
http://rapidshare.com/files/452641147/p67aud4b3.f3b
Gigabyte P67-UD5-B3-f3c
http://rapidshare.com/files/452641148/p67aud5b3.f3c
Gigabyte P67-UD7-B3-f3c
http://rapidshare.com/files/452641149/p67aud7b3.f3c
Blackoberst
03-15-2011, 14:24
Thanks, but you posted one link twice (I think A0Q is missing). Any idea on the actual bios version? With the other bioses it's easy to understand, but with these ... A0Q?
Sorry, here is A0Q. http://www.mediafire.com/?i6n6mi208c5wa79
Version E7672IMS.A0E = v10.0b14 (pre-release/BETA)
Version E7672IMS.A0M = v10.0b22 (did not find it uploaded)
Version E7672IMS.A0O = v10.0b24
Version E7672IMS.A0Q should be v10.0b26 I guess.
A0E seems to be a good one. One user on the msi forum was reporting that he had problems with a B2 board.
.AOQ
instant lock on disable spread spectrum with 2600k and mushkin 1600mhz 6-8-6-24 @1.65v
also not overclockable in the os via control center 2 keeps saying reboot to change multy
so as it stands the .AOE bios was best but now i cant use it lol
would also like to see and option in the securty bios tab to copy bios 1 to bios 2
both bios gone no post just power cycle on/off
the ME update gave an error
Gigabyte P67-UD3-B3-f3b
http://rapidshare.com/files/452641146/p67aud3b3.f3b
This is PH67A BIOS.
you´re right, my fault...
Evocarlos
03-15-2011, 18:39
Re-hosted these two BIOSes. Can anyone provide any feedback on the version and whether or not there's PLL override available?
- P67A-GD80 (http://hwbot.org/hardware/motherboard/p67a_gd80) (A0O): http://91.121.148.119/downloads/BIOS/E7672IMS.A0O
- P67A-GD80 (http://hwbot.org/hardware/motherboard/p67a_gd80) (A0E): http://91.121.148.119/downloads/BIOS/E7672IMS.A0E
.A0E i had no problems all the way up to 5.3ghz pll was left on auto just set 50x / 1866mhz xmp and 1.4vcore
http://valid.canardpc.com/show_oc.php?id=1686527
i put the post on the msi fourm the issue appers to be intel ME related and not bios
problem is now both the bios's on the gd-80 are crouupt and im awaiting a blank chip so i can get it working and finish my testing
Afrokalle
03-15-2011, 18:54
NO pll override in this bios.
prooflink on modlabs.net (http://www.modlabs.net/gallery/image/5346)
I'm testing some bios for saphire p67 with pll override....
...i will ask if i'm allowed to upload :)
Massman, sorry for delay. My 5400MHz 2600K can't get frequency more than 4830Mhz on this Sapphire board, so, no pll override in this bios version. I'm waiting new bios about two weeks, but Sapphire don't do it :(
you´re right, my fault...
OK
Do any of the B3 BIOSes have pll override on board? Not sure because it's official release bios.
- GA-P67A-UD3-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud3_b3) (F2): http://91.121.148.119/downloads/BIOS/p67aud33.f2
- GA-P67A-UD3P-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud3p_b3) (F2): http://91.121.148.119/downloads/BIOS/p7aud3p3.f2
- GA-P67A-UD3R-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud3p_b3) (F2): http://91.121.148.119/downloads/BIOS/p7aud3r3.f2
- GA-P67A-UD4-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud4_b3) (F2): http://91.121.148.119/downloads/BIOS/p67aud43.f2
- GA-P67A-UD5-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud5_b3) (F2): http://91.121.148.119/downloads/BIOS/P67AUD53.F2
- GA-P67A-UD7-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud7_b3) (F2): http://91.121.148.119/downloads/BIOS/P67AUD73.F2
Yes,final and beta came with PLL.
Btw,
add beta BIOS from post #349.
More new BIOSes:
- GA-P67A-UD4-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud4_b3) (F3b): http://91.121.148.119/downloads/BIOS/p67aud4b3.f3b
- GA-P67A-UD7-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud7_b3) (F3c): http://91.121.148.119/downloads/BIOS/p67aud7b3.f3c
- GA-P67A-UD5-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud5_b3) (F3c): http://91.121.148.119/downloads/BIOS/p67aud5b3.f3c
More new BIOSes:
- GA-P67A-UD3-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud3_b3) (F3b): http://91.121.148.119/downloads/BIOS/p67aud3b3.f3b
This is PH67A-UD3-B3 BIOS.
Urgh, I'm not paying attention :p
Will they keep creating new bios for the B2 models?? I'm afraid to be stuck forever with the same beta bios :(
reggiesanchez
03-17-2011, 03:54
b3 bioses will work with b2 I beleave
b3 bioses will work with b2 I beleave
You can try.
Linuxfan
03-17-2011, 04:27
Gigabyte P67A-UD3-B3 board with F2 BIOS doesn't run 2133mhz ram divider but does have PLL override and runs my 5.6g chip at the 56x multi just fine. :)
Hope for a BIOS update to make the ram work at the higher divider again.
That's good info.
It's pretty normal that the B3 BIOS works, though ... it's not like something significantly changed with updating to a new chipset revision.
Falkentyne
03-17-2011, 09:32
He didn't test the B3 bios with the B2 board, though. The above poster has a B3 board.
Doh.
Someone should try, though. GBT boards have two BIOSes anyways :D
ASRock ... B3 Ready !!! :D
Fatal1ty
P67 Professional (1.70 - 17/03/2011)
http://download.asrock.com/bios/1155/P67%20Professional(1.70)ROM.zip
1. Improve mouse fucntion under BIOS setup.
2. Keep User Profile after clear CMOS.
3. Patch 15" CRT monitor for BIOS setup.
P67 Extreme6 (1.60 - 17/03/2011)
http://download.asrock.com/bios/1155/P67%20Extreme6(1.60)ROM.zip
1. Improve mouse fucntion under BIOS setup.
2. Keep User Profile after clear CMOS.
3. Patch 15" CRT monitor for BIOS setup.
P67 Extreme4 (1.60 - 08/03/2011)
http://download.asrock.com/bios/1155/P67%20Extreme4(1.60)ROM.zip
Modify boot logo
P67 Pro (1.50 - 08/03/2011)
http://download.asrock.com/bios/1155/P67%20Pro(1.50)ROM.zip
Modify boot logo
P67 Pro3 (1.80 - 08/03/2011)
http://download.asrock.com/bios/1155/P67%20Pro3(1.80)ROM.zip
Modify boot logo
Rehosted Asrock BIOSes.
(ps: nearing 1GB of P67 BIOS !)
- P67 Professional (http://hwbot.org/hardware/motherboard/fatal1ty_p67_professional) (1.70): http://91.121.148.119/downloads/BIOS/P67PE1.70
- P67 Extreme6 (http://hwbot.org/hardware/motherboard/p67_extreme6) (1.60): http://91.121.148.119/downloads/BIOS/P67EX61.60
- P67 Extreme4 (http://hwbot.org/hardware/motherboard/p67_extreme4) (1.60): http://91.121.148.119/downloads/BIOS/P67EXT41.60
- P67 Pro3 (http://hwbot.org/hardware/motherboard/p67_pro3) (1.80): http://91.121.148.119/downloads/BIOS/P67P31.80
- P67 Pro (http://hwbot.org/hardware/motherboard/p67_pro) (1.50): http://91.121.148.119/downloads/BIOS/P67P1.50
hokiealumnus
03-17-2011, 13:48
That's good info.
It's pretty normal that the B3 BIOS works, though ... it's not like something significantly changed with updating to a new chipset revision.
Has anyone confirmed this perchance? I'm hoping 1.60 for the ASRock Extreme 6 adds the positives of 1.30, 1.33A & 1.40 together. Don't want to brick the B2 board though.
Linuxfan
03-17-2011, 15:42
b3 bioses will work with b2 I beleave
He didn't test the B3 bios with the B2 board, though. The above poster has a B3 board.
Did try putting the original UD3 board's P7e BIOS on the new rev3 board.... @BIOS said something wasn't right and it didn't work. :lol
Did try putting the original UD3 board's P7e BIOS on the new rev3 board.... @BIOS said something wasn't right and it didn't work. :lol
Crossflash must be done in DOS with special SPIFLASH (http://www.fileden.com/files/2009/12/20/2696817/SPIFLASH.zip).
mAlkAv!An
03-18-2011, 09:00
Biostar TP67XE
F221: http://www.file-upload.net/download-3293740/P67AF221.zip.html
F308: http://www.file-upload.net/download-3293742/P67AF308.zip.html (thanks to namegt)
Rehosted new Biostar BIOSes. Thanks to mAlkAv!An
- TP67XE (http://hwbot.org/hardware/motherboard/tp67xe)(F308): http://91.121.148.119/downloads/BIOS/P67AF308.BST
- TP67XE (http://hwbot.org/hardware/motherboard/tp67xe)(F221): http://91.121.148.119/downloads/BIOS/P67AF221.BST
I think that Asus forgot to have also P8P67 series mobos and not only the M4E :D
I think that Asus forgot to have also P8P67 series mobos and not only the M4E :D
Asus new BIOS:
P8P67-DELUXE
ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...E-ASUS-1502.zip (ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155/P8P67_DELUXE/P8P67-DELUXE-ASUS-1502.zip)
P8P67-EVO
ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...O-ASUS-1502.zip (ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155/P8P67_EVO/P8P67-EVO-ASUS-1502.zip)
P8P67-PRO
ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...O-ASUS-1502.zip (ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155/P8P67_PRO/P8P67-PRO-ASUS-1502.zip)
P8P67
ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...7-ASUS-1401.zip (ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155/P8P67/P8P67-ASUS-1401.zip)
Hey stasio, I didn't see those links in the past posts or they popped up right now?
In the first case sorry, it's my fault, in the second case, we'll try this new 1502 probably tomorrow night, and thanks ;)
- P8P67 (http://hwbot.org/hardware/motherboard/p8p67)(1401): http://91.121.148.119/downloads/BIOS/P8P67-ASUS-1401.ROM
- P8P67 Deluxe (http://hwbot.org/hardware/motherboard/p8p67_deluxe) (1502): http://91.121.148.119/downloads/BIOS/P8P67-DELUXE-ASUS-1502.ROM
- P8P67 Evo (http://hwbot.org/hardware/motherboard/p8p67_evo) (1502): http://91.121.148.119/downloads/BIOS/P8P67-EVO-ASUS-1502.ROM
- P8P67 Pro (http://hwbot.org/hardware/motherboard/p8p67_pro) (1502): http://91.121.148.119/downloads/BIOS/P8P67-PRO-ASUS-1502.ROM
Also renamed the thread title. It's just a collection now.
1002MB of BIOS :D
GENiEBEN
03-18-2011, 14:14
whats new in 1502 and do they have the pll fix?
AlbertMwugabi
03-18-2011, 14:24
Does the ASUS P8P67 Deluxe 1502 BIOS apply to both B3 and non B3 chipset motherboard?
any changelog for the 1502 Bios ?
:edit:
BIOS 1502 changes:
1. fix the CPU/turbo ratio is wrong after clear CMOS
2. fix mouse cursor may be drift if there is a joystick plug in
3. fix that xhci legacy support function fail if there is another PCIE usb3.0 addon card on the system
4. Improve TPU's algorithm to bring better performance on some CPUs.
http://eu2.sapphiretech.com/archive/gm/drivers/18_BIOS_update_for_P67_under_WinX64_only_634360678 445132500.zip
1APHE058. PLL Override! It works :)
First Sapphire BIOS with pll override re-hosted
- Pure Black P67 (http://hwbot.org/hardware/motherboard/pure_black_p67_hydra) bios (058): http://91.121.148.119/downloads/BIOS/1APHE058.ROM
Hi all and thanks for this topic i have one question this bios work fine with B3 Revision?
Blackoberst
03-22-2011, 12:58
MSI P67A-GD65/55/53 new bios update A7681IMS.1A3 / v1.10b3.
http://www.mediafire.com/?90zx4p4c02o193i
Change log:
- Fixed the after update Bios system hang issue.
- Update the Postmsg module.
- Fix SMBIOS type 13 error.
- Fix Lan Disable patch and ATI HD6xxx patch lose efficacy.
- Add F11 solution.
- Correct disable USB Controller cannot into S3/S4.
- Fixed When installing 3TB HDD and then press F11 to select UEFI DVD, the system will hang in blank screen.
- Auto load XMP timing when memory frequency manual mode higher than XMP frequency.
- Adjust CPU voltage.
- Fix the VT-D item can not grayout.
- Fix mouse is abnormal in setup game page.
- Update F75221 module V0.0A.
- P67A-GD65 (http://hwbot.org/hardware/motherboard/p67a_gd65) bios (1.10b3): http://91.121.148.119/downloads/BIOS/E7681IMS.1A3
- P67A-GD55 (http://hwbot.org/hardware/motherboard/p67a_gd55) bios (1.10b3): http://91.121.148.119/downloads/BIOS/E7681IMS.1A3
- P67A-GD53 (http://hwbot.org/hardware/motherboard/p67a_gd53) bios (1.10b3): http://91.121.148.119/downloads/BIOS/E7681IMS.1A3
Don_Corleone
03-22-2011, 14:55
- Fixed the after update Bios system hang issue.
I hope this works, GD65 can not work like past after updating bios
The p67a-ud4-b3 bios f3b is a pretty big improvement over f2, it still needs some work though.
Latest BIOSes. Bios for B2 board is compatible with B3 board.
- P67A-GD65 (http://hwbot.org/hardware/motherboard/p67a_gd65) bios (1.10b4): http://91.121.148.119/downloads/BIOS/E7681IMS.1A4
- P67A-GD55 (http://hwbot.org/hardware/motherboard/p67a_gd55) bios (1.10b4): http://91.121.148.119/downloads/BIOS/E7681IMS.1A4
- P67A-GD53 (http://hwbot.org/hardware/motherboard/p67a_gd53) bios (1.10b4): http://91.121.148.119/downloads/BIOS/E7681IMS.1A4
- P67A-C43 (http://hwbot.org/hardware/motherboard/p67a_c43) bios (1.10b2): http://91.121.148.119/downloads/BIOS/E7673IMS.1A2
- P67A-C43 (http://hwbot.org/hardware/motherboard/p67a_c43) bios (1.10b1): http://91.121.148.119/downloads/BIOS/E7673IMS.1A1
- P67A-C43 (http://hwbot.org/hardware/motherboard/p67a_c43) bios (1.9): http://91.121.148.119/downloads/BIOS/E7673IMS.190
- P67A-C45 (http://hwbot.org/hardware/motherboard/p67a_c45) bios (1.10b2): http://91.121.148.119/downloads/BIOS/E7673IMS.1A2
- P67A-C45 (http://hwbot.org/hardware/motherboard/p67a_c45) bios (1.10b1): http://91.121.148.119/downloads/BIOS/E7673IMS.1A1
- P67A-C45 (http://hwbot.org/hardware/motherboard/p67a_c45) bios (1.9): http://91.121.148.119/downloads/BIOS/E7673IMS.190
- P67A-S43 (http://hwbot.org/hardware/motherboard/p67a_s43) bios (1.10b2): http://91.121.148.119/downloads/BIOS/E7673IMS.1A2
- P67A-S43 (http://hwbot.org/hardware/motherboard/p67a_s43) bios (1.10b1): http://91.121.148.119/downloads/BIOS/E7673IMS.1A1
- P67A-S43 (http://hwbot.org/hardware/motherboard/p67a_s43) bios (1.9): http://91.121.148.119/downloads/BIOS/E7673IMS.190
Thanks to Matose!
- Big Bang-Marshal (http://hwbot.org/hardware/motherboard/big_bang_marshal_b3) bios (1.0b21): http://91.121.148.119/downloads/BIOS/E7670IMS.10U
- P8P67 (http://hwbot.org/hardware/motherboard/p8p67)(1401): http://91.121.148.119/downloads/BIOS/P8P67-ASUS-1401.ROM
- P8P67 Deluxe (http://hwbot.org/hardware/motherboard/p8p67_deluxe) (1502): http://91.121.148.119/downloads/BIOS/P8P67-DELUXE-ASUS-1502.ROM
- P8P67 Evo (http://hwbot.org/hardware/motherboard/p8p67_evo) (1502): http://91.121.148.119/downloads/BIOS/P8P67-EVO-ASUS-1502.ROM
- P8P67 Pro (http://hwbot.org/hardware/motherboard/p8p67_pro) (1502): http://91.121.148.119/downloads/BIOS/P8P67-PRO-ASUS-1502.ROM
^tried it on my pro mobo got a error This is not a EFI bios WTF?
Thanks to Matose!
- Big Bang-Marshal (http://hwbot.org/hardware/motherboard/big_bang_marshal_b3) bios (1.0b21): http://91.121.148.119/downloads/BIOS/E7670IMS.10U
Pieter, I think the BIOS I sent you (10U) is 1.0b30
GENiEBEN
03-28-2011, 18:11
^tried it on my pro mobo got a error This is not a EFI bios WTF?
rename it to something short (new.rom)
Pieter, I think the BIOS I sent you (10U) is 1.0b30
Doh. I just failed in counting. It's 1, 2, 3 ..., 9, A, B, ..., X, Y, Z.
Will edit :D
Did anyone had problems with bclk changing on MIVE? I accidentally pressed Q-Reset and now can't change bclk. Tried CCMOS, new BIOS (can't go back to older version now) but nothing helped
Also thanks to Matose:
- Maximus IV Extreme (http://hwbot.org/hardware/motherboard/maximus_iv_extreme) bios (1303): http://91.121.148.119/downloads/BIOS/MaximusIV-Extreme-ASUS-1303.ROM
Changed some settings for 'Load Extreme OC Profile'
Revise ROG connect K-sku CPU ratio limit
Fixed some S3 Resume bugs
Updates some USB Peripherals Compatibility
Did anyone had problems with bclk changing on MIVE? I accidentally pressed Q-Reset and now can't change bclk. Tried CCMOS, new BIOS (can't go back to older version now) but nothing helped
Pt1t had this issue, I think. IIRC, it was dead Intel ME part of BIOS.
As far as I can remember, no idea :-/
Both of my BIOSes are f. up :/ would new BIOS chip help?
I will have to contact Pt1t to see how he fixed it, thanks
P67A-UD3-B3
http://rapidshare.com/files/454814759/p67aud33.f3b
P67A-UD3P-B3
http://rapidshare.com/files/454815603/p7aud3p3.f3b
P67A-UD4-B3
http://rapidshare.com/files/454814760/p67aud43.f3c
http://rapidshare.com/files/454814761/p67aud43.f3d
- GA-P67A-UD3-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud3_b3) bios (F3b): http://91.121.148.119/downloads/BIOS/p67aud33.f3b
- GA-P67A-UD3P-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud3p_b3) bios (F3b): http://91.121.148.119/downloads/BIOS/p7aud3p3.f3b
- GA-P67A-UD4-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud4_b3) bios (F3d): http://91.121.148.119/downloads/BIOS/p67aud43.f3d
- GA-P67A-UD4-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud4_b3) bios (F3c): http://91.121.148.119/downloads/BIOS/p67aud43.f3c
F3C has some has some 1:8 problems as far as i know.. F3D is okay.
Both of my BIOSes are f. up :/ would new BIOS chip help?
I will have to contact Pt1t to see how he fixed it, thanks
you need new eeprom, i dont know how that bug is coming and i had that kind of bug/Me part dead with 2 brands using MX eeprom 32Mo chip.
Anyone tested F3C/D in 01'SE yet? :)
Linuxfan
03-28-2011, 22:05
Anyone tested F3C/D in 01'SE yet? :)
Going to run '01 with F3C BIOS on the UD7 soon :)
Any known difference in performance between UD7 and UD5 boards?
you need new eeprom, i dont know how that bug is coming and i had that kind of bug/Me part dead with 2 brands using MX eeprom 32Mo chip.
New eeprom or new bios chip :/
Thank you
Any known difference in performance between UD7 and UD5 boards?
Yes, about 5-7% in 3D benchmarks cause of crappy NF200 :)
That's why I love my UD4 :P Also the Intel's DP67BG was a fantastic 01 board :)
UD4-B3 F3b FTW
F2:
http://img148.imageshack.us/img148/6109/43433414.th.jpg (http://img148.imageshack.us/i/43433414.jpg/)
F3b:
http://img26.imageshack.us/img26/8456/f3br.th.jpg (http://img26.imageshack.us/i/f3br.jpg/)
F3c:
http://img268.imageshack.us/img268/3343/f3cq.th.jpg (http://img268.imageshack.us/i/f3cq.jpg/)
F3d:
http://img847.imageshack.us/img847/3118/f3d.th.jpg (http://img847.imageshack.us/i/f3d.jpg/)
Wow. F3d is messing up 01 performance!
Did anyone had problems with bclk changing on MIVE? I accidentally pressed Q-Reset and now can't change bclk. Tried CCMOS, new BIOS (can't go back to older version now) but nothing helped
i had this issue before, fixed it by flashing to newer bios.
Wow. F3d is messing up 01 performance!
I don´t have these problems. With F3d I just loose 200points compared to F3b...
rename it to something short (new.rom)
aah thanks man
Asus P8P67-DELUXE bios 1505
http://www.asustek.pl/Pawel%20S/P8P67-DELUXE-ASUS-1505.rar
Asus P8P67
bios 1506
http://www.asustek.pl/Pawel%20S/P8P67-ASUS-1506.rar
P67A-GD65/GD53 Beta Bios 1A5
Modification C-Etat
http://msi.waycos.co.kr/bios/76811a5.zip
Updated. Now 219 bios files totalling 1090MB.
- P8P67 (http://hwbot.org/hardware/motherboard/p8p67) bios (1506): http://91.121.148.119/downloads/BIOS/P8P67-ASUS-1506.ROM
- P8P67 Deluxe (http://hwbot.org/hardware/motherboard/p8p67_deluxe) bios (1505): http://91.121.148.119/downloads/BIOS/P8P67-DELUXE-ASUS-1505.ROM
- P67A-GD53 (http://hwbot.org/hardware/motherboard/p67a_gd53) bios (1.10b5): http://91.121.148.119/downloads/BIOS/E7681IMS.1A5
- P67A-GD55 (http://hwbot.org/hardware/motherboard/p67a_gd55) bios (1.10b5): http://91.121.148.119/downloads/BIOS/E7681IMS.1A5
- P67A-GD65 (http://hwbot.org/hardware/motherboard/p67a_gd65) bios (1.10b5): http://91.121.148.119/downloads/BIOS/E7681IMS.1A5
GENiEBEN
03-31-2011, 18:45
Changelog, B3-only?
B2/B3. Only GIGABYTE is no longer developping B2 bioses (and has different boards)
P67A-UD7-B3
http://rapidshare.com/files/455470804/P67aud73.f3h
DStealth
04-02-2011, 08:48
Asus p8p67 delux (1503) - ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155/P8P67_DELUXE/P8P67-DELUXE-ASUS-1503.zip
Asus p8p67-m (0805) - ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155/P8P67-M/P8P67-M-ASUS-0805.zip
Asus p8p67-m pro (0708) - ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155/P8P67-M_PRO/P8P67-M-PRO-ASUS-0708.zip
Thanks! Re-hosted BIOSes:
- GA-P67A-UD7-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud7_b3) bios (F3h): http://91.121.148.119/downloads/BIOS/P67aud73.f3h
- P8P67 Deluxe (http://hwbot.org/hardware/motherboard/p8p67_deluxe) bios (1503): http://91.121.148.119/downloads/BIOS/P8P67-DELUXE-ASUS-1503.ROM
- P8P67-M (http://hwbot.org/hardware/motherboard/p8p67_m) bios (0805): http://91.121.148.119/downloads/BIOS/P8P67-M-ASUS-0805.ROM
- P8P67-M Pro (http://hwbot.org/hardware/motherboard/p8p67_m_pro) bios (0708): http://91.121.148.119/downloads/BIOS/P8P67-M-PRO-ASUS-0708.ROM
Both of my BIOSes are f. up :/ would new BIOS chip help?
I will have to contact Pt1t to see how he fixed it, thanks
If you got a similar bios chip replace it with the corrupted one but don't push it all the way in. should be loose enough when you boot and the code loads you can swop it with the corrupted bios. It will fix your corrupted bios
nanoprobe
04-02-2011, 16:17
b3 bioses will work with b2 I beleave
I flashed my B2 Asus P8P67-M Pro with the B3 bios before I sent it back. It caused the EFI bios to basically stop working. It would not save most manual settings. They would all revert back to auto after reboot. The multiplier would not go past 43. One bonus it that it would boot and run @ 105.5 BCLK when 104 was the limit before flashing. YMMV
Just found these bioses. No changelog
- P67A-GD65 (http://hwbot.org/hardware/motherboard/p67a_gd65) bios (1.10b6): http://91.121.148.119/downloads/BIOS/E7681IMS.1A6
- P67A-GD55 (http://hwbot.org/hardware/motherboard/p67a_gd55) bios (1.10b6): http://91.121.148.119/downloads/BIOS/E7681IMS.1A6
- P67A-GD53 (http://hwbot.org/hardware/motherboard/p67a_gd53) bios (1.10b6): http://91.121.148.119/downloads/BIOS/E7681IMS.1A6
Also a new BIOS for GD-80
- P67A-GD80 (http://hwbot.org/hardware/motherboard/p67a_gd80) bios (10.0b29): http://91.121.148.119/downloads/BIOS/E7672IMS.A0T
E7672IMS.A0Q ---> E7672IMS.A0T
- Fix hang Entering Setup.interface if sata mode disabled.
- Fix VDroop Control function fail in SVID Mode issue.
- Fixed the after update Bios system hang issue.
- Modify Lan can awake S3/S4/S5 even if Onboard LAN Controller disabled.
- Fix a PS2 Mouse/keyboard awake issue.
- Fix mouse is abnormal in game page.
- Update the Postmsg module
- Fix a F11 Boot Menu issue.
- Fix G-skill F3-19200CL9D-4GBPIS unstable if XMP enabled.
- Fix memory(Corsair CMG6GX3M3A2000C7 4DIMM) XMP Enabled, the system hang 45
- Fix memory(G.skill F3-16000CL6T-6GBPIS)set frequency:1866 timming:6-9-6-24 voltage:1.65, the system keep rebooting.
- Fix G-Skill F3-17000CL9Q-16GBXLD boot fail when XMP enabled.
- Auto load XMP timing when memory frequency manual mode higher than XMP frequency.
- Fixed When installing 3TB HDD and then press F11 to select UEFI DVD, the system will hang in blank screen
- Fix the oc profile issue.
- Patch memory overclock fail to enable Multi BIOS function issue.
- Suppress USB3.0 Legacy Mode Support item for new BIOS spec.
- Fix some vcore issue.
- Patch the VIA chip USB 3.0 test fail issue.
- Fix issue no edit box when double click string control(mouse.c).
- Modify some setup string/option
any noticable changes in the UD7 f3h bios?
chuchnit
04-04-2011, 05:08
any noticable changes in the UD7 f3h bios?
Haven't had a chance to even d/l it yet. I'll be trying this week.
any noticable changes in the UD7 f3h bios?
New Beta F3h
Fix: VDimm
Beta F3g
Fix: remove Floppy Support
Fix: BCLK 100
Bug: Vdimm
GA-P67A-UD5-B3
http://rapidshare.com/files/455812996/7aud53.f3g
New Beta F3g
Fix: remove Floppy Support
Fix: BCLK 100
Thanks Kurbel
- GA-P67A-UD5-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud5_b3) bios (F3g): http://91.121.148.119/downloads/BIOS/7aud53.f3g
Diabolo 80
04-04-2011, 20:46
New BIOS in the old Mobo ;)
http://img716.imageshack.us/img716/9948/aqvacopy.png (http://img716.imageshack.us/i/aqvacopy.png/)
I try with SPIFlash,but didn't work,
dated 26.Feb 2008 (Ver.1.20).
What is the "MAGIC"?
Anybody has newer SPIFlash to cross flash the BIOS (Ver.2.xx)?
Diabolo 80
04-05-2011, 06:41
No MAGIC!
GA-P67A-UD5-B3 - F3c mod for B2
http://zalil.ru/30795498
GA-P67A-UD5-B3 - F3g mod for B2
http://zalil.ru/30795516
Use @BIOS for FLASH
All works fine, more stable, but i have some problem: EasyTune6 can't detect CPU freq and i can't change BLCK in Windows.
Thanx mayak for mods
have you installed Windows Management Instrumentation software from the website, if not thats probably why you cant get full functionality of ET, either that or some bios related issue.
Diabolo 80
04-05-2011, 06:54
have you installed Windows Management Instrumentation software from the website, if not thats probably why you cant get full functionality of ET, either that or some bios related issue.
Yes, i have instaled WMI software but ET6 don't work
must be something to do with the bios mod then
No MAGIC!
GA-P67A-UD5-B3 - F3c mod for B2
http://zalil.ru/30795498
GA-P67A-UD5-B3 - F3g mod for B2
http://zalil.ru/30795516
Use @BIOS for FLASH
All works fine, more stable, but i have some problem: EasyTune6 can't detect CPU freq and i can't change BLCK in Windows.
Thanx mayak for mods
Ahh,how to contact Mayak?
I have UD7-B2.
Lsdmeasap
04-05-2011, 07:33
must be something to do with the bios mod then
Yes, must be caused by BIOS mod then I think. I use B3 BIOS on B2 and can change Bclk with ET no problem, only tested UD7 though.
Thanks for helping out Stasio guys! I am unable to help from my end or I would get in big trouble, so I was hoping one of you guys could help him or I've been trying to find a method from someone so I could mod BIOS ID for him.
SO when using this BIOS mod auto recovery doesn't kick in due to mis-matched BIOS ID's, or are you quickly flashing the backup BIOS to B3 as well?
Falkentyne
04-05-2011, 07:34
Big question is
Does that mod for B2->B3 fix LLC1 on UD5?
Wonder why no B2 version fix ever came out...when F1 version of B3 was dated OLDER than the latest B2 beta?
Was LLC1 overshooting on B2 a BIOS problem or was it hardware?
Lsdmeasap
04-05-2011, 07:50
Hahaha, why everyone so mad about LLC1, is it really that bad on UD5?
I see same complaints on UD4/UD7 too, but all seems fine to me?
Diabolo 80
04-05-2011, 07:57
I dont have problems LLC1 on my UD5 whith different ver. BIOSses B2 or B3
Falkentyne
04-05-2011, 08:17
Wait, are you sure?
LLC1 on the B2 bios would overvolt by 0.05V+ over 1.4v, and LLC2 would overvolt by 0.15v and crash the system.
This was fixed on F1 BIOS on the B3 board...so the B2 board crossflashed with F3g doesn't overvolt with LLC1 anymore?
:)
- P67A-UD5 (http://hwbot.org/hardware/motherboard/p67a_ud5) bios (F3g1): http://91.121.148.119/downloads/BIOS/7aud53.f3g1 (B3-BIOS mod, click for info (http://hwbot.org/forum/showthread.php?p=105055))
- P67A-UD5 (http://hwbot.org/hardware/motherboard/p67a_ud5) bios (F3c1): http://91.121.148.119/downloads/BIOS/7aud5.f3c1 (B3-BIOS mod, click for info (http://hwbot.org/forum/showthread.php?p=105055))
Diabolo 80,
thanks a lot,done!!
Modded BIOS UD7-B3=>B2:
http://www.fileden.com/files/2009/12/20/2696817/P67aud73-B2.zip
GA-P67A-UD4-B3 - F3d*
http://ifolder.ru/22793048
http://i4.aijaa.com/b/00211/7833799.png
http://i5.aijaa.com/b/00101/7826891.png
Modded BIOSes for B2 GIGABYTE boards. The original BIOS was for B3 boards.
End-users found the bios to be stable.
:)
- P67A-UD5 (http://hwbot.org/hardware/motherboard/p67a_ud5) bios (F3g1): http://91.121.148.119/downloads/BIOS/7aud53.f3g1 (B3-BIOS mod, click for info (http://hwbot.org/forum/showthread.php?p=105055))
- P67A-UD5 (http://hwbot.org/hardware/motherboard/p67a_ud5) bios (F3c1): http://91.121.148.119/downloads/BIOS/7aud5.f3c1 (B3-BIOS mod, click for info (http://hwbot.org/forum/showthread.php?p=105055))
- P67A-UD7 (http://hwbot.org/hardware/motherboard/p67a_ud7) bios (F3h1): http://91.121.148.119/downloads/BIOS/P67aud73.f3h1 (B3-BIOS mod, click for info (http://hwbot.org/forum/showthread.php?p=105055))
Diabolo 80
04-05-2011, 08:49
GA-P67A-UD7-B3 - F3h* mod for B2
http://ifolder.ru/22793067
GA-P67A-UD4-B3 - F3d* mod for B2
http://ifolder.ru/22793048
Thanx mayak for mods
- P67A-UD4 (http://hwbot.org/hardware/motherboard/p67a_ud4) bios (F3d1): http://91.121.148.119/downloads/BIOS/p67aud43.f3d1 (B3-BIOS mod by Mayak, click for info (http://hwbot.org/forum/showthread.php?p=105055))
Are those bioses good only for B2 boards or the changes affect B3 board performance (in 2d/3d)?
Those BIOSes are have B3 base, but modified for B2 boards. I don't think there is many changes. B2 and B3 are identical for BIOS.
All works fine, more stable, but i have some problem: EasyTune6 can't detect CPU freq and i can't change BLCK in Windows.
Thanx mayak for mods
For me all OK ,with ET6.
Only thing CPU-Z read as P67A-UD7 (no "-B3").
AIDA64,ET6...OK.
Flashed with QFlash to F2;F3c and back to F3h...no problem.
Thanks Diabolo 80 and mayak for mods.
Diabolo 80
04-05-2011, 10:21
For me all OK ,with ET6.
Only thing CPU-Z read as P67A-UD7 (no "-B3").
Flashed with QFlash to F2;F3c and back to F3h...no problem.
Thanx mayak for mods.
Ok. Thanks, I will try to solve this problem.
I'm very pleased to help you
Ok. Thanks, I will try to solve this problem.
I'm very pleased to help you
Thanks,only CPU-Z,
but ET6 and AIDA show P67A-UD7-B3!
Can you ask mayak which hex editor he use?
Thanks a lot.
http://i6.aijaa.com/b/00169/7826555.png
http://i5.aijaa.com/b/00101/7826891.png
Can you ask mayak which hex editor he use?
Thanks a lot.
http://www.x-ways.net/winhex/index-m.html
http://www.x-ways.net/winhex/index-m.html
Nice work! :)
http://www.x-ways.net/winhex/index-m.html
Mayak...THANKS A LOT!!!!
Anything you need just post or PM me.
after flashing the board B2 on the bios mod, on the motherboard you can flash any official firmware from B3
after flashing the board B2 on the bios mod, on the motherboard you can flash any official firmware from B3
Thanks man!!
Now I can use new bios!! Not in the dark anymore!!!
In case anyone needs its:
- Big Bang-Marshal (http://hwbot.org/hardware/motherboard/big_bang_marshal_b3) bios (1.0b28): http://91.121.148.119/downloads/BIOS/E7670IMS.10S
- Big Bang-Marshal (http://hwbot.org/hardware/motherboard/big_bang_marshal_b3) bios (1.0b23): http://91.121.148.119/downloads/BIOS/E7670IMS.10N
New eeprom or new bios chip :/
Thank you
Regarding to this problem, can I use Rampage III Extreme bios chip and just flash it to MIVE?
- P67A-UD4 (http://hwbot.org/hardware/motherboard/p67a_ud4) bios (F3d1): http://91.121.148.119/downloads/BIOS/p67aud43.f3d1 (B3-BIOS mod by Mayak, click for info (http://hwbot.org/forum/showthread.php?p=105055))
pll overvoltage dosent work. max 48x with pll overvoltage enable.
Lsdmeasap
04-06-2011, 09:37
That's ok, just re-flash with normal B3 BIOS once you have flashed that one, then you will be good to go
pll overvoltage dosent work. max 48x with pll overvoltage enable.
Massman,
please take out "no pll override" from first page for:
- P67A-UD4 bios (F3d1): http://91.121.148.119/downloads/BIOS/p67aud43.f3d1 (no pll override)(B3-BIOS mod by Mayak, click for info)
All new UDx-B3 BIOS's are with pll override.
http://i8.aijaa.com/b/00961/7834025.png
That's ok, just re-flash with normal B3 BIOS once you have flashed that one, then you will be good to go
thx, all work now with original B3 bios. moded bios have option with pll overvoltage but dosent work.
DerBrain
04-07-2011, 09:30
The P8P67 bios 1506 is it for Rev.B2 or the new Rev.B3 ?
Massman,
please take out "no pll override" from first page for:
- P67A-UD4 bios (F3d1): http://91.121.148.119/downloads/BIOS/p67aud43.f3d1 (no pll override)(B3-BIOS mod by Mayak, click for info)
All new UDx-B3 BIOS's are with pll override.
http://i8.aijaa.com/b/00961/7834025.png
I just put it next to the Mayak modded BIOSes. Gradus said the option is there, but it just doesn't work properly?
Gradus said the option is there, but it just doesn't work properly?
yes.
- Sabertooth P67 (http://hwbot.org/hardware/motherboard/sabertooth_p67) bios (1502): http://91.121.148.119/downloads/BIOS/ASUS_P67_SABERTOOTH_1502.ROM
GA-P67A-UD7-B3 - F3 (http://www.fileden.com/files/2009/12/20/2696817/P67AUD73.f3.zip)
GA-P67A-UD5-B3 - F3 (http://www.fileden.com/files/2009/12/20/2696817/P67AUD53.f3.zip)
GA-P67A-UD4-B3 - F3 (http://www.fileden.com/files/2009/12/20/2696817/p67aud43.f3.zip)
GA-P67A-UD3P-B3 - F3 (http://www.fileden.com/files/2009/12/20/2696817/p7aud3p3.f3.zip)
GA-P67A-UD3R-B3 - F3 (http://www.fileden.com/files/2009/12/20/2696817/p7aud3r3.f3.zip)
(waiting for UD3-B3...)
GA-PH67A-UD3-B3 - F3 (http://www.fileden.com/files/2009/12/20/2696817/ph7aud33.f3.zip)
Diabolo 80
04-08-2011, 08:26
GA-P67A-UD7-B3 - F3 (http://www.fileden.com/files/2009/12/20/2696817/P67AUD73.f3.zip)
GA-P67A-UD5-B3 - F3 (http://www.fileden.com/files/2009/12/20/2696817/P67AUD53.f3.zip)
GA-P67A-UD4-B3 - F3 (http://www.fileden.com/files/2009/12/20/2696817/p67aud43.f3.zip)
GA-P67A-UD3P-B3 - F3 (http://www.fileden.com/files/2009/12/20/2696817/p7aud3p3.f3.zip)
GA-P67A-UD3R-B3 - F3 (http://www.fileden.com/files/2009/12/20/2696817/p7aud3r3.f3.zip)
(waiting for UD3-B3...)
GA-PH67A-UD3-B3 - F3 (http://www.fileden.com/files/2009/12/20/2696817/ph7aud33.f3.zip)
Thanks a lot bro!
Mayak told to me that with this BIOS version ET6 works perfectly on B2 mobo, I will try it soon.
Do those have PLL override? Previous official BIOSes didn't have it.
Yes,
all with PLL override.
Edit:
Modified BIOS to flash back from B3 to B2:
http://www.fileden.com/files/2009/12/20/2696817/p67aud7.f8f1.zip
http://www.fileden.com/files/2009/12/20/2696817/P67AUD5.f7e1.zip
http://www.fileden.com/files/2009/12/20/2696817/p67aud4.f8i1.zip
Thanks to Mayak.
Added:
GA-P67A-UD7 - F8 (http://www.fileden.com/files/2009/12/20/2696817/P67AUD7.8.zip)
GA-P67A-UD5 - F7 (http://www.fileden.com/files/2009/12/20/2696817/P67AUD5.7.zip)
-Solve press reset button cause system abnormal
-Implemented "Multi-Steps Load-Line" (UD7/UD5-10 levels).
Flash with "Load Optimized Defaults" and clear CMOS.
DO NOT use old BIOS profile!!
All re-hosted:
- GA-P67A-UD3P-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud3p_b3) bios (F3): http://91.121.148.119/downloads/BIOS/p7aud3p3.f3
- GA-P67A-UD3R-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud3p_b3) bios (F3): http://91.121.148.119/downloads/BIOS/p7aud3r3.f3
- P67A-UD4 (http://hwbot.org/hardware/motherboard/p67a_ud4) bios (F8i1): http://91.121.148.119/downloads/BIOS/p67aud4.f8i1 (B3-BIOS mod by Mayak, click for info (http://hwbot.org/forum/showthread.php?p=105666))
- GA-P67A-UD4-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud4_b3) bios (F3): http://91.121.148.119/downloads/BIOS/p67aud43.f3
- P67A-UD5 (http://hwbot.org/hardware/motherboard/p67a_ud5) bios (F7e1): http://91.121.148.119/downloads/BIOS/P67AUD5.F7E1 (B3-BIOS mod by Mayak, click for info (http://hwbot.org/forum/showthread.php?p=105666))
- P67A-UD5 (http://hwbot.org/hardware/motherboard/p67a_ud5) bios (F7): http://91.121.148.119/downloads/BIOS/P67AUD5.F7
- GA-P67A-UD5-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud5_b3) bios (F3): http://91.121.148.119/downloads/BIOS/P67AUD53.F3
- P67A-UD7 (http://hwbot.org/hardware/motherboard/p67a_ud7) bios (F8f1): http://91.121.148.119/downloads/BIOS/p67aud7.f8f1 (B3-BIOS mod by Mayak, click for info (http://hwbot.org/forum/showpost.php?p=105666&postcount=473))
- P67A-UD7 (http://hwbot.org/hardware/motherboard/p67a_ud7) bios (F8): http://91.121.148.119/downloads/BIOS/P67AUD7.F8
- GA-P67A-UD7-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud7_b3) bios (F3): http://91.121.148.119/downloads/BIOS/P67AUD73.F3
Another 1 hour and will be on GB official site.
Edit:
All on line.
GA-P67A-UD3- B3 - F3 (http://download.gigabyte.us/FileList/BIOS/mb_bios_ga-p67a-ud3-b3_f3.exe)
Diabolo 80
04-08-2011, 21:53
F3 works fine on my UD5 (B2) board, i don't see bugs. ET6 works fine too. LLC level 6 good for me. It's THE BEST Bios
F3 works fine on my UD5 (B2) board, i don't see bugs. ET6 works fine too. LLC level 6 good for me. It's THE BEST Bios
Yes,I agree with you.
BIOS is different,but NOT defective and garbage
,as they attack me on "hardwareluxx.de" (http://translate.google.com/translate?hl=en&sl=de&tl=en&u=http://www.hardwareluxx.de/community/f219/gigabyte-ga-p67a-ud3p-b3-p67a-ud4-b3-p67a-ud5-b3-intel-p67-3-a-791516-49.html&rurl=translate.google.com) forum.
They in Germany had his own "Guru" and they beleive only to him.
They had been surprise and sceptic,how I post BIOS before GB server and act like half closed eyes horses,waiting always for "Jockey" command.
WhiteLion
04-09-2011, 06:19
I test the new F3 bios for the GA-P67A-UD4-B3 and it's run fine :)
- GA-P67A-UD3-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud3_b3) bios (F3): http://91.121.148.119/downloads/BIOS/p67aud33.f3
-Solve press reset button cause system abnormal
YES!
Thank you!
Reset button after GPU crash causing false "Failed CPU OC" measures and five reboots before I can enter bios has been driving me nuts.
Hopefully this fixes that! I would be very, very, very happy!
This made my UD4 feel like a brand new, far better, mobo.
It likes my hypers a bit better too!
reggiesanchez
04-11-2011, 02:55
new p8p67 bios BIG improvement too thank you
This made my UD4 feel like a brand new, far better, mobo.
:D
GA-P67A-UD7-B3 - F4a (http://ggts.gigabyte.eu/FileList/1069247/p67aud73.f4a)
masterfile
04-12-2011, 07:39
works great on Asus P8P67 with D2 2600K. Got to play around a bit with VCore, PLL cuz Temps are still too high at >1.4 VCore. Thx for modding this nice bios :)
- GA-P67A-UD7-B3 (http://hwbot.org/hardware/motherboard/ga_p67a_ud7_b3) bios (F4a): http://91.121.148.119/downloads/BIOS/p67aud73.f4a
- Maximus IV Extreme (http://hwbot.org/hardware/motherboard/maximus_iv_extreme) bios (1485): http://91.121.148.119/downloads/BIOS/MaximusIV-Extreme-ASUS-1485.ROM
Changed some memory stuff
added Memory timings:
I/O Latency + RTL Offset
can play with it with oc memory...
Haha, thas cool! I downloaded BIOS for my Max IV Extreme a few minutes before your post and now I can download this new :-).
hokiealumnus
04-12-2011, 13:50
Checked on ASUS' site last night and there is a new BIOS 1202 for the P8P67 WS Revolution. It seems to be a tad more stable for multi-threaded benches at higher clocks. They also dumbed down the power section of the UEFI by an option or so. Unfortunately they don't give you a way to link directly, but here's the product page (http://usa.asus.com/product.aspx?P_ID=dzgoion0wgHoT7tp&templete=2).
Good catch!
- P8P67 WS Revolution (http://hwbot.org/hardware/motherboard/p8p67_ws_revolution) bios (1202): http://91.121.148.119/downloads/BIOS/P8P67-WS-REVOLUTION-ASUS-1202.ROM
Nik@_N0body
04-13-2011, 14:03
Alright, time for a small update on this front as well:
The E7681IMS.1A0-Final-Release is out. *As it is not available on the product pages for the mainboards we are concerned with in here, I will upload it. *For those of you, that are already using the E7681IMS.1A6-BETA-Release, don't bother to flash E7681IMS.1A0, because E7681IMS.1A6 and E7681IMS.1A0 are identical [.1A0 is .1A6 re-released with "final" status].
And now let me move on to the changelogs. *Changelogs for E7681IMS.1A5 (v1.10b5) and E7681IMS.1A6 (v1.10b6) are still missing. *Those will appear in blue letters in the following E7681IMS.190 -> E7681IMS.1A0 overview:
E7681IMS.190 ---> E7681IMS.1A0
- Update CSM Amilegacy16.bin file for fix System cannot enter Win7 32bit after installing Comback recover software(SATA3.0 PORT).
- Add USB3.0 support in legacy mode.
- Fix Multi BIOS watch dog fail in DXE issue.
- Fixed coding error.
- Fix usb mouse(steelseries 62001/Wintek.WM700)Movement Issue and usb mouse (ROCCAT.Kova) can not be detected well in UEFI bios
- Fixed the after update Bios system hang issue.
- Update the Postmsg module.
- Fix SMBIOS type 13 error.
- Fix Lan Disable patch and ATI HD6xxx patch lose efficacy.
- Add F11 solution.
- Correct disable USB Controller cannot into S3/S4.
- Fixed When installing 3TB HDD and then press F11 to select UEFI DVD, the system will hang in blank screen.
- Auto load XMP timing when memory frequency manual mode higher than XMP frequency.
- Adjust CPU voltage.
- Fix the VT-D item can not grayout.
- Fix mouse is abnormal in setup game page.
- Update F75221 module V0.0A.
- Fix the oc profile issue.
- Fix issue no edit box when double click string control.
- Modify some setup string/option.
- Update "Patch memory overclock fail to enable Multi BIOS function issue" solution.
- Support PCB2.1(ERP:15S).
- Change the Package C State limit item default value.
- Add new module, SmiVariable and "ALWAYS_PUBLISH_HII_RESOURCES"=1 for WMI function
- Fixed the system will hang in blank screen when press F11 to select UEFI DVD installing 64Bit OS issue.
- Fix USB mouse(RAZER COPPERHEAD RZ01-050200, RAZER DeathAdder RZ01-0015, RAZER COPPERHEAD RZ01-050100) Movement Issue.
- Fix DRAM Timing not match SPD value.
- Change the Package C State limit item default value.
>>Use the MSI HQ Forum USB flasher<< (http://forum-en.msi.com/index.php?topic=116721.0), Method II to flash this attached UEFI Release.
Didn't see this posted.
Available here: http://forum-en.msi.com/index.php?action=dlattach;topic=144655.0;attach=79 37
- P67A-GD80 (http://hwbot.org/hardware/motherboard/p67a_gd80) bios (10.0b30): http://91.121.148.119/downloads/BIOS/E7672IMS.A0U
- P67A-GD65 (http://hwbot.org/hardware/motherboard/p67a_gd65) bios (1.10): http://91.121.148.119/downloads/BIOS/E7681IMS.1A0
- P67A-GD55 (http://hwbot.org/hardware/motherboard/p67a_gd55) bios (1.10): http://91.121.148.119/downloads/BIOS/E7681IMS.1A0
- P67A-GD53 (http://hwbot.org/hardware/motherboard/p67a_gd53) bios (1.10): http://91.121.148.119/downloads/BIOS/E7681IMS.1A0
- P67A-S43 (http://hwbot.org/hardware/motherboard/p67a_s43) bios (1.10): http://91.121.148.119/downloads/BIOS/E7673IMS.1A0
- P67A-C45 (http://hwbot.org/hardware/motherboard/p67a_c45) bios (1.10): http://91.121.148.119/downloads/BIOS/E7673IMS.1A0
- P67A-C43 (http://hwbot.org/hardware/motherboard/p67a_c43) bios (1.10): http://91.121.148.119/downloads/BIOS/E7673IMS.1A0
Thank you for this magnificent thread , `tis very helpful .
A question comes in mind though , there are couple of roms here that I cannot see in the official manuf. ftp , like- asus p8p67 dlx 1505 ,
are those official and stable , or some kind of beta / 3rd party roms ?
Thanks ,
Danny.
90% of the BIOSes in this thread are BETA. That means unofficial and no guaranteed stability. Overclockers just don't care about what the manufacturer warrants and prefer to test beta bioses on their own :D
Nik@_N0body
04-14-2011, 16:59
Isn't the official 1.1 for the GD80 better than the 1.0b30?
http://www.asrock.com/MB/download.asp?Model=Fatal1ty%20P67%20Professional&o=BIOS
bios 1.80 for asrock P67 professional
Just a warning for those using Gigabyte's B3 bios on B2 boards:
I successfully updated mine to F3. Every thing was fine until I had the great idea of trying to update the backup bios (expecting that if something went wrong it come back to a B3 bios instead of an B2). After the bios swaping process MY BOARD "DIED" :( It doesn't post, doesn't make any beep, with or without CPU it doesn't start anymore...
I bought some dice for trying good scores for initial K contest and I stopped before using any of it just because of this great idea of messing up the backup bios before benching...
I'm just sad now.... I'm really dumb :( for realz :(
I update the BIOS in my MSI P67A-GD65 (B3) to 1.10 and now i have problems with the GSkill RipjawsX CAS6 cant change requency or timings or vram :S
Xtreme-X23
04-16-2011, 08:03
Thanks for the modified Bios for UD4!!!
Xtreme-X23
04-16-2011, 08:39
after flashing the board B2 on the bios mod, on the motherboard you can flash any official firmware from B3
So, I have a B2 UD4 Motherboard, after flashing a B3 Modded BIOS, I can Flash any original B3 BIOS to the UD4-B2 motherboard???
So, I have a B2 UD4 Motherboard, after flashing a B3 Modded BIOS, I can Flash any original B3 BIOS to the UD4-B2 motherboard???
Yes, you can Flash any original B3 BIOS to the UD4-B2 motherboard
vBulletin® v3.7.1, Copyright ©2000-2013, Jelsoft Enterprises Ltd.