shar00750 Posted December 23, 2016 Share Posted December 23, 2016 Hi, i use evc for 5850 dcii and gtx285matrix (both 6208). everything work but the + is - and the - is + , you can see in the picture i add. the picture is for 285matrix but it is the same with 5850dcii. Quote Link to comment Share on other sites More sharing options...
elmor Posted December 24, 2016 Share Posted December 24, 2016 Which version of the evc software are you using? Can you try latest from here? https://www.dropbox.com/s/rj6aohe4ln3d0q3/eVc%20v1b5%20161224.zip?dl=0 Quote Link to comment Share on other sites More sharing options...
shar00750 Posted December 24, 2016 Author Share Posted December 24, 2016 Thanks, i will try this varsion. i have another question : i have 7870 gigbyte with chl 8214 and i can't find the scl/sda pin. http://www.infineon.com/dgdl/pb-chl8203.pdf?fileId=5546d462533600a40153567f657c28ad Quote Link to comment Share on other sites More sharing options...
GtiJason Posted December 24, 2016 Share Posted December 24, 2016 (edited) Thanks, i will try this varsion. i have another question : i have 7870 gigbyte with chl 8214 and i can't find the scl/sda pin. http://www.infineon.com/dgdl/pb-chl8203.pdf?fileId=5546d462533600a40153567f657c28ad "The eVc device uses the 2-wire/I2C/SMBus interface to communicate. . . . . . This interface works by using two signals (Data/SDA and Clock/SCL) plus a ground reference (Ground/GND), " SMB Data = Pin 18 SMB Clock =Pin 19 Edited December 24, 2016 by GtiJason Quote Link to comment Share on other sites More sharing options...
shar00750 Posted December 24, 2016 Author Share Posted December 24, 2016 thanks man , i did not notice . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.