RawZ Posted January 11, 2011 Share Posted January 11, 2011 Hi Guys, Does anyone on the P67 MSI boards have problems with memory timings? No matter what setting I choose, what speed or voltage, I can't choose my own timings. I've tried 4 different sets of memory, loaded the OC BIOS .171 & latest .181 but to no avail. If I change just one tiny setting from auto (bios reports cas 8 is auto) to cas 9 the board won't boot. It'll power up and nothing happens. I have to reset the CMOS to get back to normal. My timings are holding me back but if I can't change them from auto.. Well what you going to do? Lol. Quote Link to comment Share on other sites More sharing options...
Massman Posted January 11, 2011 Share Posted January 11, 2011 Hm, interesting! I'll fire up the board tomorrow. Quote Link to comment Share on other sites More sharing options...
Bullus Posted January 16, 2011 Share Posted January 16, 2011 I'v got the GD65 and I don't have any problems. Did u place them on the blue slots? Corsair dominator GT 1866 2x2gb Quote Link to comment Share on other sites More sharing options...
RawZ Posted January 16, 2011 Author Share Posted January 16, 2011 Thinks its my board. I now can't change the mem speed at all. Running auto speed and Cas for benching now; 1333Mhz @ 6-6-6-20. Messing my scores up man Quote Link to comment Share on other sites More sharing options...
Bullus Posted January 16, 2011 Share Posted January 16, 2011 (edited) Wich bios do u use? edit; misread ur 1 post Try to increase VCC_SA voltage (max.1.2V) Edited January 16, 2011 by Bullus Quote Link to comment Share on other sites More sharing options...
RawZ Posted January 16, 2011 Author Share Posted January 16, 2011 174 & 185. Think I'm going to have to get a new one. Quote Link to comment Share on other sites More sharing options...
ThanatosLRSD Posted January 24, 2011 Share Posted January 24, 2011 (edited) I spent days trying to get my G.Skill ripjaws to run at 1600. No matter what I try I get boot failure on cold-boot. I ordered the Asrock Extreme4 to replace my GD55. What a disappointment Edited January 25, 2011 by ThanatosLRSD Quote Link to comment Share on other sites More sharing options...
steponz Posted January 24, 2011 Share Posted January 24, 2011 Have you tried raising your tras? I found that on 2 different types of ram that would get the system to boot.. Still doesn't help that much with performance.. but it helps with something.. I really think it has to do with the modules on this board... I am going to give the gb ud7 board a run to see what I can get out of her... Quote Link to comment Share on other sites More sharing options...
ThanatosLRSD Posted January 25, 2011 Share Posted January 25, 2011 My Ripjaws are rated for 7-8-7-24. What do you suggest changing the tRAS to? Quote Link to comment Share on other sites More sharing options...
7ate9 Posted March 30, 2011 Share Posted March 30, 2011 Try T2 first. Luckily sandys got a big cache so it hides most of the rams latencys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.