Andrix85 Posted February 8, 2012 Share Posted February 8, 2012 Hi boys... I have a 2500K with batch L130C510 and i push it @ 5.250 MHZ under Phase Change with my ASROCK Z68 PRO3 GEN3...I would like to search the limit of this CPU; what are the best setting into the BIOS to reach the limit? I read that SANDY BRIDGE don't like much cold temperature; is it true? Can i try with air cooled around 0° of temperature? Thanks for your suggests... Andrea Quote Link to comment Share on other sites More sharing options...
Crew Olesius Posted February 8, 2012 Crew Share Posted February 8, 2012 at first you should check chip with air cooling! set 2c/2th and try to boot system with high cpu multiplayer. if you can see windows boot menu, it is ok and you can hope to have that multiplayer stable with lower temps and surely 4c/4th. sometimes chip cannot do high mp, but can reach higher freq with bclk raising... you must check many profiles good luck! Quote Link to comment Share on other sites More sharing options...
Andrix85 Posted February 8, 2012 Author Share Posted February 8, 2012 Ok, thanks...I try with Phase Change to set multi higher than 52x with bclk at 100MHZ but the system stopped...If i try with aircooled will change everything for you? Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted February 8, 2012 Share Posted February 8, 2012 overclocking Sandybridge is not rocket science, if you got the basic stuff done (provide enough cooling and voltage) and it can't do x53 in same conditions it does x52 then x52 is its max multiplier Quote Link to comment Share on other sites More sharing options...
Andrix85 Posted February 8, 2012 Author Share Posted February 8, 2012 Ok, if the 52X is the max multiplier, it is a possibility to reach higher frequency or it is the limit of CPU? Because if a set a 52x multiplier and than i set higher blck the max frequency is 5250 MHZ. Quote Link to comment Share on other sites More sharing options...
thebanik Posted February 9, 2012 Share Posted February 9, 2012 Ok, if the 52X is the max multiplier, it is a possibility to reach higher frequency or it is the limit of CPU? Because if a set a 52x multiplier and than i set higher blck the max frequency is 5250 MHZ. With SB, if you are sure about your settings, and you are not able to boot with higher multiplier then volts/cooling does not matter. That is the highest clock/multi of your chip. As of yet no 1 has been able to cross the clock limit by changing mobo/settings/cooling (if cooling is limited to begin with), but that is if you are experienced enough with SB and know what you are doing. Quote Link to comment Share on other sites More sharing options...
Andrix85 Posted February 15, 2012 Author Share Posted February 15, 2012 Hi, In Italy can order new I5 2550K...These CPUs have good overcloking potentials? I would like to try one.. Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted February 15, 2012 Share Posted February 15, 2012 2550K oveclock same as all other SB, if you talk about averages Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.