oc_windforce Posted August 15, 2012 Share Posted August 15, 2012 (edited) MPower Layout Image shot Dull Luster Black PCB & New hitsink design(yellow point) 12 phase Power Block Multi-BIOS On-Board Power&Reset&OCGENIE Switch V-Check Point DrMOS Alarm RED LED & 12 Phase Power LED PCIe3.0 (16/0/0) (8/8/0) (8/4/4) PCIe2.0 (16/0/no support) (8/8/no support) Back Panel (New Hardware : Bluetooth,WiFi Module) Debug LED WiFi Antenna OC BIOS Screen System image System Rig. CPU : 3770K Retail M'b : MSI Z77 MPower Memory : GSKILL TridentX DDR2600 CL10-12-12-21 4G*2 VGA: MSI 680 Lighting HDD: intel SSD 330 120G Power : PC-Powercooling 1K Cooling : Air [bARAM 120mm] NDA 8/28..... Edited August 26, 2012 by oc_windforce Quote Link to comment Share on other sites More sharing options...
Crew Vivi Posted August 15, 2012 Crew Share Posted August 15, 2012 Dude nice! That board is super good looking . Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted August 15, 2012 Share Posted August 15, 2012 PCB is very clean, I don't really like the BIOS but it's a matter of taste Quote Link to comment Share on other sites More sharing options...
Massman Posted August 15, 2012 Share Posted August 15, 2012 Dude nice! That board is super good looking . Agreeing with that! Clean PCB = :ws: Looking forward to the (real) OC results! Quote Link to comment Share on other sites More sharing options...
K404 Posted August 15, 2012 Share Posted August 15, 2012 Another comment on how clean the PCB is. Good lookin board! Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted August 15, 2012 Share Posted August 15, 2012 looks decent, but I'd like the heatsinks to be actually heatsinks Quote Link to comment Share on other sites More sharing options...
jurek Posted August 15, 2012 Share Posted August 15, 2012 2 questions 1. why are there 2 grounds i v check point? 2. where is that radiator cpu from? what happened with oryginal ventilator? is the one You have now better? Quote Link to comment Share on other sites More sharing options...
neliz Posted August 15, 2012 Share Posted August 15, 2012 looks decent, but I'd like the heatsinks to be actually heatsinks I guess you prefer bullets? Quote Link to comment Share on other sites More sharing options...
Crabby Posted August 15, 2012 Share Posted August 15, 2012 No more bullets please! The pcb does look fantastic. Quote Link to comment Share on other sites More sharing options...
El Gappo Posted August 15, 2012 Share Posted August 15, 2012 One sexy looking board, bet it's a wizz to insulate. I guess you prefer bullets? Bahaha Quote Link to comment Share on other sites More sharing options...
sin0822 Posted August 15, 2012 Share Posted August 15, 2012 (edited) looks nice Edit: i really like its color matching with the MSI GPUs, this looks a lot better than the asrock one. Edited August 15, 2012 by sin0822 Quote Link to comment Share on other sites More sharing options...
oc_windforce Posted August 26, 2012 Author Share Posted August 26, 2012 (edited) AVEXIR Memory With Z77 MPower AVEXIR Memory working movie Edited August 26, 2012 by oc_windforce Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted August 26, 2012 Share Posted August 26, 2012 I had a go with this board during Campus Party. Promised not to say that it has issues running PSC and BBSE at frequencies above 1200MHz, so you'll have wait until 28th to hear it Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted August 26, 2012 Share Posted August 26, 2012 I had a go with this board during Campus Party. Promised not to say that it has issues running PSC and BBSE at frequencies above 1200MHz, so you'll have wait until 28th to hear it good heads up lol Quote Link to comment Share on other sites More sharing options...
oc_windforce Posted August 27, 2012 Author Share Posted August 27, 2012 (edited) My bench open M'b : MSI Z77 MPower Memory : GSKILL TridentX DDR2600 -12-12-21 4G*2 AVEXIR 4GB x4 DDR3-2666C11 1.65V Memory(AVD3U26661104G-4CM) VGA: MSI 680 Lighting HDD: intel SSD 330 120G Power : PC-Powercooling 1K Cooling : Air [bARAM 120mm] 5G OverClock TridentX DDR2600 CL10 Over DDR2800 3DMark Vantage 3DMark11 #1 3DMark11 #2 AVEXIR 4GB x4 DDR3-2666C11 Full Bank(16GByte) OverClock CL11-13-13-35 2T DDR2760 Super-pi 32M Pass AVEXIR 4GB x4 DDR3-2666C11 Full Bank(16GByte) OverClock CL11-13-13-35 2T DDR2800 Super-pi 1M Pass AVEXIR 4GB x4 DDR3-2666C11 Full Bank(16GByte) OverClock CL12-14-13-25 2T DDR2840 Super-pi 32M Pass Edited August 27, 2012 by oc_windforce Quote Link to comment Share on other sites More sharing options...
Xtreme Addict Posted August 28, 2012 Share Posted August 28, 2012 Ln2 results please Quote Link to comment Share on other sites More sharing options...
oc_windforce Posted August 31, 2012 Author Share Posted August 31, 2012 Ln2 results please Memory test by MTC Emperor LN2 test by alvinkenzo Mpower Movie Lead actor : alvinkenzo :D:D Quote Link to comment Share on other sites More sharing options...
Vladutz20 Posted September 7, 2012 Share Posted September 7, 2012 Nice mb. Quote Link to comment Share on other sites More sharing options...
K404 Posted September 24, 2012 Share Posted September 24, 2012 Is it true that this board is limited to 1.80vCore and it suffers from droop? Quote Link to comment Share on other sites More sharing options...
Booj Posted September 24, 2012 Share Posted September 24, 2012 I haven't checked for vdroop but I think 2.15v is enough to kill any chip heh Quote Link to comment Share on other sites More sharing options...
K404 Posted September 24, 2012 Share Posted September 24, 2012 (edited) Good to see Thankyou. I read the vCore controller is only rated to 1.80v? http://www.overclock.net/t/1309099/msi-z77-m-power-big-bang-testing-with-cl3p20 ......annnddddd....when will the 3DMark01 tweak make it into MPower BIOS? Edited September 25, 2012 by K404 Quote Link to comment Share on other sites More sharing options...
K404 Posted October 2, 2012 Share Posted October 2, 2012 Any info on these questions? Quote Link to comment Share on other sites More sharing options...
oc_windforce Posted October 14, 2012 Author Share Posted October 14, 2012 (edited) My Mpower LN2 frist try GD65 & MAXIMUS-G with the same CPU had a CB, but does not happen Mpower And Clock was a bit rise Super-pi 32M MAX (Same CPU) GD65 & MAXIMUS-G 6.600G Mpower MAX 6.668G http://valid.canardpc.com/show_oc.php?id=2542935 PiFast 6.66G Super-pi 1M 6.73G Super-pi 32M 6.66G 3DMark06 Edited October 14, 2012 by oc_windforce Quote Link to comment Share on other sites More sharing options...
T0lsty Posted October 14, 2012 Share Posted October 14, 2012 tried this board too, but with 17.3 bios - as result both bioses are corrupted and mb don`t boot . but i notised that it clocks cpu good. but not ram . 8-12-8 2600 / psc are unbootable(( . Quote Link to comment Share on other sites More sharing options...
oc_windforce Posted October 14, 2012 Author Share Posted October 14, 2012 tried this board too, but with 17.3 bios - as result both bioses are corrupted and mb don`t boot . but i notised that it clocks cpu good. but not ram . 8-12-8 2600 / psc are unbootable(( . in my case .. 2/4 slot.. more than 1300 by 1t is impossible. but 1/3 slot.. 1t is possible Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.