TiN
02-14-2010, 08:42
Casting: TiN & T0lsty
Equipment: 2 webcameras, 1 DV-camera
Finalised hardware specs to go this time:
E8600 Retail + Xtremelabs.org MAGNUM Copper pot
ASUS Maximus Formula + Xtremelabs.org Chipset Alu pot
Few sticks of DDR2 (Ballistix i guess)
8800GTX G80 card fully modded (caps, OVP, OCP, Vgpu, Vmem) + highgertz's GPU copper pot
Backup 8800Ultra G80 card fully modded + same pot
Enermax Revolution 1250W
xDevs.com Engineering Sample device.
Fluke 87V + Tektronix 2246 for accurate control.
Extra rig
i920
ASUS P6T Deluxe OCPalm
Goodram DDR3 3x2GB 2000MHz sticks
all other is the same.
Will try to push E8600 on maximus to the max, then 3D benchmarks with
Estimated details:
9 AM GMT+2 Prepairs start
9.00 - 11.00 - TiN modding 8800Ultra card, pretesting mods on stock cooling and hooking xDevs.com ES unit
~11.00 arrival of teammate T0lsty with some hardware and 50L of LN2
11.30-12.00 - Time for planning and benching table setup
12.00-13.00 - E8600 pretesting, finding out max FSB for mobo, and MAX clock for CPU. few short runs of spi1m
13.00-16.00 - 3D benchies of GTX card if everything ok
16.00-17.30 - 3D benchies of GTX on i7 920, or if E8600 rig fit ok - continue on 775 rig.
if LN2 left then continue until last droplet evaporate out
Link:
www.livestream.com/xtremelabsorg
Currently: ONLINE, repeat of yesterday videos :D
Equipment: 2 webcameras, 1 DV-camera
Finalised hardware specs to go this time:
E8600 Retail + Xtremelabs.org MAGNUM Copper pot
ASUS Maximus Formula + Xtremelabs.org Chipset Alu pot
Few sticks of DDR2 (Ballistix i guess)
8800GTX G80 card fully modded (caps, OVP, OCP, Vgpu, Vmem) + highgertz's GPU copper pot
Backup 8800Ultra G80 card fully modded + same pot
Enermax Revolution 1250W
xDevs.com Engineering Sample device.
Fluke 87V + Tektronix 2246 for accurate control.
Extra rig
i920
ASUS P6T Deluxe OCPalm
Goodram DDR3 3x2GB 2000MHz sticks
all other is the same.
Will try to push E8600 on maximus to the max, then 3D benchmarks with
Estimated details:
9 AM GMT+2 Prepairs start
9.00 - 11.00 - TiN modding 8800Ultra card, pretesting mods on stock cooling and hooking xDevs.com ES unit
~11.00 arrival of teammate T0lsty with some hardware and 50L of LN2
11.30-12.00 - Time for planning and benching table setup
12.00-13.00 - E8600 pretesting, finding out max FSB for mobo, and MAX clock for CPU. few short runs of spi1m
13.00-16.00 - 3D benchies of GTX card if everything ok
16.00-17.30 - 3D benchies of GTX on i7 920, or if E8600 rig fit ok - continue on 775 rig.
if LN2 left then continue until last droplet evaporate out
Link:
www.livestream.com/xtremelabsorg
Currently: ONLINE, repeat of yesterday videos :D