packet Posted February 26, 2010 Share Posted February 26, 2010 hey guys trying to get past 222 anyone run into this ? getting a 6F post code and traced it back to a XS thread about uncore and that went on about the 222 wall and hard mod needed any help is appriciated Quote Link to comment Share on other sites More sharing options...
packet Posted February 26, 2010 Author Share Posted February 26, 2010 hey guys trying to get past 222 anyone run into this ? getting a 6F post code, traced it back to a XS thread about uncore and that went on about the 222 wall and a hard mod needed any help is appriciated Quote Link to comment Share on other sites More sharing options...
BenchZowner Posted February 26, 2010 Share Posted February 26, 2010 Well, you do need to modify your board if it's the old revision ( 1.0 ) that can't boot with any PCI-Express bus frequency over 103MHz. The mod isn't an easy task for the folks without experience in soldering, so if you need it and have to do it, make sure your soldering skills are up to the task, if you can't then just have somebody else do it for you ( a TV/Radio electronics repair shop can possibly do it for you ) Quote Link to comment Share on other sites More sharing options...
packet Posted February 26, 2010 Author Share Posted February 26, 2010 (edited) thanks for the reply dam that sux.....what a downer the board is rock solid at 222 aswell Edited February 27, 2010 by packet Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.