Stermy57 Posted November 28, 2012 Share Posted November 28, 2012 Hello, Does anyone know how to make a rheostat (to change Vcore up to 1.825vcore) on ABIT ST6-RAID? Quote Link to comment Share on other sites More sharing options...
TerraRaptor Posted November 28, 2012 Share Posted November 28, 2012 I guess the same way TUSL have. I'll check my dead SA6 this week to advise - it is quite the same to st6. Quote Link to comment Share on other sites More sharing options...
Stermy57 Posted November 28, 2012 Author Share Posted November 28, 2012 (edited) so it's the same? Can you give me a picture? I understand that the voltage regulator is the ISL 6524 CB on TUSL2-C board but i can not find it -.- is near the mainboard's power connection? Edited November 29, 2012 by Stermy57 Quote Link to comment Share on other sites More sharing options...
Stermy57 Posted December 12, 2012 Author Share Posted December 12, 2012 up Quote Link to comment Share on other sites More sharing options...
Stermy57 Posted January 6, 2013 Author Share Posted January 6, 2013 up Quote Link to comment Share on other sites More sharing options...
Crew Strunkenbold Posted January 6, 2013 Crew Share Posted January 6, 2013 This is what I found here FB - 100kOhm VSEN1 - 50kohm (OVP @ 115% DAC = 2.05V I tried it some years ago, FB works but cant get higher than 1.8xV before mobo gets very unstable. Probably I did the OVP mod wrong. Quote Link to comment Share on other sites More sharing options...
Stermy57 Posted January 6, 2013 Author Share Posted January 6, 2013 This is what I found hereFB - 100kOhm VSEN1 - 50kohm (OVP @ 115% DAC = 2.05V I tried it some years ago, FB works but cant get higher than 1.8xV before mobo gets very unstable. Probably I did the OVP mod wrong. uhh i see it... Quote Link to comment Share on other sites More sharing options...
Stermy57 Posted January 6, 2013 Author Share Posted January 6, 2013 i understand that the RT9238 is the same of ISL6524CB on TUSL2-C... i want to understand with trimmer i hav e to use... 470ohm? Quote Link to comment Share on other sites More sharing options...
TerraRaptor Posted January 6, 2013 Share Posted January 6, 2013 better use high precision 70-100kohm one. High precision means you need lots of rotations to get from 0 to highest value. Quote Link to comment Share on other sites More sharing options...
Stermy57 Posted January 7, 2013 Author Share Posted January 7, 2013 This is what I found hereFB - 100kOhm VSEN1 - 50kohm (OVP @ 115% DAC = 2.05V I tried it some years ago, FB works but cant get higher than 1.8xV before mobo gets very unstable. Probably I did the OVP mod wrong. I read the page you linked but I have not found anything about the abit st6-raid better use high precision 70-100kohm one. High precision means you need lots of rotations to get from 0 to highest value. Thanks for this information I am a beginner Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.e52f3f5854bd88b34658ea176b069d2d.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.