Jump to content
HWBOT Community Forums

One more and I can rest in peace...


Recommended Posts

  • 2 weeks later...
  • 1 month later...

First series:

 

Test Setup:

CPU: Intel Core2Duo E8400 @ (x9 for stab. test, x6 for suicide) with a stupid low profile cooler

MB: Gigabyte GA-EP45-UD3R

Memory: check list

PSU: Seasonic Platinum 1000 Watts

OS: Windows XP

Fan: Noctua fan on the memory module

Cooling: Air

 

Highest valid on air so far: http://valid.canardpc.com/show_oc.php?id=2686886

 

1.- Stability test at 4-4-4-12-2T-Auto w/ 2.2Vmem:

Boot at 250 MHz FSB (Divider: 266MHz & 4.00A aka 1:2strap266) => 500 MHz mem

Then increase FSB using SetFSB by 10 MHz, run SuperPi32M (takes about 20 mins to finish)

=> repeat till SuperPi32 Crash

Write down stable freq (highest freq memory module was able to compute SPi32M)

 

2.- Stability test at 5-5-5-15-2T-Auto w/ 2.2Vmem:

Boot at 300 MHz FSB (Divider: 333Hz & 4.00B aka 1:2strap333) => 600 MHz mem

Then increase FSB using SetFSB by 10 MHz, run SuperPi32M (takes about 20 mins to finish)

=> repeat till SuperPi32 Crash

Write down stable freq (highest freq memory module was able to compute SPi32M)

 

2.- Suicide CPU-Z Screen w/ 2.6Vmem 5-5-5-15-2T-Auto:

Boot at 350 MHz FSB (Divider: 333Hz & 4.00B aka 1:2strap333) => 700 MHz

Then increase FSB using SetFSB 10 MHz by 10 MHz till Windows XP freeze

Write down Crash freq - 10 MHz.

 

 

Results:

DDR2TestingFirstSeries.png

 

Pics of setup:

 

normal_DDR2TestingPic01.JPG

 

normal_DDR2TestingPic02.JPG

 

normal_DDR2TestingPic03.JPG

 

 

Red: either dead (DOA) or I need to solder something back on the PCB.

Edited by Christian Ney
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...