mcnico63 Posted July 19, 2013 Share Posted July 19, 2013 Hi all, That's two weeks I there to try to run my Pi series in CAS 6-9-6-24 (as Ivy) but impossible. It works with stock frequency @ 1000MHz CAS 7-9-7-24 but I can't boot into CAS 6 @ 1000MHz, please need you I have not tested @ 1200MHz CAS 8 but it worked on Ivy. Thank you to all Quote Link to comment Share on other sites More sharing options...
sin0822 Posted July 20, 2013 Share Posted July 20, 2013 you have a retail CPU? Quote Link to comment Share on other sites More sharing options...
mcnico63 Posted July 20, 2013 Author Share Posted July 20, 2013 CPU purchased commercially Quote Link to comment Share on other sites More sharing options...
Alex@ro Posted July 20, 2013 Share Posted July 20, 2013 try setting twcl manually at 8... Quote Link to comment Share on other sites More sharing options...
mcnico63 Posted July 23, 2013 Author Share Posted July 23, 2013 Ok thanks, I test it today Quote Link to comment Share on other sites More sharing options...
mcnico63 Posted July 23, 2013 Author Share Posted July 23, 2013 Hello, I still can't get ... I let the timings if someone can help me Thx Quote Link to comment Share on other sites More sharing options...
Alex@ro Posted July 23, 2013 Share Posted July 23, 2013 Hmm,are you loading XMP profile or set them manually?Go for manual,set them 6-9-6-24-1T,leave secondary's as auto and try with twcl 7-8, and go for tertiary,should be agle to set something like this order in memtweakit: 4-5-5-20-6-6-4-6-6,set dimm voltage as 1.65,manually set multiplier for dd3-2000 and try ... Also how does it act,55 code or continuous restart loop? Quote Link to comment Share on other sites More sharing options...
mcnico63 Posted July 23, 2013 Author Share Posted July 23, 2013 Yes I am MANUAL for CAS and voltages. I have the code 55 when I test CAS 6, I will try with your tertiary timings;) It's ok in CAS 8 @ 1200 with 1.75v Thank you. Quote Link to comment Share on other sites More sharing options...
zzolio Posted July 23, 2013 Share Posted July 23, 2013 try 8 12 8 28 1T not all psc like 8 11 8 Quote Link to comment Share on other sites More sharing options...
mcnico63 Posted July 25, 2013 Author Share Posted July 25, 2013 Hi, I still can't get the CAS 6, and I also have a problem with the agent sytem I can't even put MANUAL, AI TUNNER in MANUAL. It remains OFFSET. Quote Link to comment Share on other sites More sharing options...
rsnubje Posted July 29, 2013 Share Posted July 29, 2013 For this board it's normal that these voltages are offsets. FYI, Stock SA is 0.825V if I'm correct. Stock IO around 1.050v. In case you were wondering. What offsets do you currently use? Quote Link to comment Share on other sites More sharing options...
mcnico63 Posted July 29, 2013 Author Share Posted July 29, 2013 Yes you are right for the default voltage. On Ivy, I put in 0.95 VCCSA and VCCIO and it was perfect but not Haswell. Some say it is the secondary and tertiary timings but I master not always ... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.