bartx Posted September 13, 2013 Share Posted September 13, 2013 I'd like to sell my water chiller. I built it two years ago, used only during my holidays and did so many good scores on this cooler - see my hwbot profile, I'll post some of them here: http://hwbot.org/submission/2302431_bartx_3dmark03_2x_geforce_9600_gt_89018_marks http://hwbot.org/submission/2404068_bartx_cinebench_r11.5_sempron_145_1.41_points http://hwbot.org/submission/2310129_bartx_3dmark03_geforce_7900_gs_33984_marks http://hwbot.org/submission/2316027_bartx_3dmark03_geforce_8600_gt_256mb_gddr3_30552_marks http://hwbot.org/submission/2312776_bartx_3dmark06_radeon_hd_4890_26897_marks With single block and CPU like Sempron 145 it can go up to -28/30C. With single GPU or stronger CPU temps will be around -24C. There are no problems with -15/20C with even three waterblocks - make sure, that they're not a flowkillers. I was testing in on 260W dummy some time ago and it was holding about -18C liquid. 2l reservoir gives it great capacity for running the benchmarks. Block used: D-Tek Fuzion V1 and 2x MCW60 (not included). I'm looking for 500 euro + shipping for this cooler. I can give one month warranty for all parts. Used parts: Chiller: Teco KE-C086 Rotary Compressor - 5355BTU Luve STVF Condenser with Elco Fan 10-plate heat exchanger Honeywell controller Bulit-in manifold (shows discharge pressures) Two 0.8mm captubes R507 refrigerant Next thing for sale is pump set. Two Iwaki pumps with base, transformer and reservoir. It took me lot of time to find proper pumps. Forget about all Swiftech crap for PC cooling - they all turn off on -10/12C and overheat. Those Iwaki pumps never overheat and the most important - they don't transfer heat to the loop - they have magnetic impelers. Pump set: Two Iwaki MD-15R pumps, each is 960l/min and 2.4m head connected in series 230V -> 110V transformer 2l reservoir Valve for easy removal the liquid Fittings I'm looking for 150 euro for this pump set. I also give one month warranty. It's the best combo for chiller, which you can buy. And it was tested by someone, who is benching, not by another "builder" who only makes unit for sale and doesn't bench at all. Chiller and parts are a bit messy, because I was using this stuff in my cellar. I will make it "bling bling" before shipping Shipping to Europe only - I'll check. Local pickup is also available - I live in Poland, Silesia (south west part), it's not that far from Germany, Czech Republic, Austria, Slovakia etc. Prices are negotiable I also have some water blocks, fitting, insulation, tubes etc. Best regards Link to comment Share on other sites More sharing options...
bartx Posted September 15, 2013 Author Share Posted September 15, 2013 I think that 400 euro for the chiller is more reasonable price Link to comment Share on other sites More sharing options...
Wildebeest Posted September 16, 2013 Share Posted September 16, 2013 Any general idea how loud this thing is ? I am looking at a LD Phase or Waterchiller (For my "Dungeon lab") and this might just fit the bill - However I have no experience with chillers like yours. Link to comment Share on other sites More sharing options...
bartx Posted September 16, 2013 Author Share Posted September 16, 2013 It's not working all the time - depends on hysteresis. At example you set -10C on the controller. It goes up to -10C then shuts off. If you have hysteresis 3C, when liquid will be warmer than -7C it turns on again. I'll make a movie on my camera in the evening. For sure it's not quiet. Link to comment Share on other sites More sharing options...
bartx Posted October 1, 2013 Author Share Posted October 1, 2013 Offers welcome Link to comment Share on other sites More sharing options...
bartx Posted October 14, 2013 Author Share Posted October 14, 2013 bump Link to comment Share on other sites More sharing options...
bartx Posted November 4, 2013 Author Share Posted November 4, 2013 bump Link to comment Share on other sites More sharing options...
T.Rex Posted December 22, 2013 Share Posted December 22, 2013 do you still have the pumpset ? Link to comment Share on other sites More sharing options...
Gorilla Posted January 16, 2014 Share Posted January 16, 2014 Hi, is avaliable water chiller? Link to comment Share on other sites More sharing options...
raules009 Posted January 17, 2014 Share Posted January 17, 2014 bump do you still have ? Link to comment Share on other sites More sharing options...
Doug2507 Posted April 15, 2014 Share Posted April 15, 2014 PM sent on the off chance it's still available! Link to comment Share on other sites More sharing options...
bartx Posted June 7, 2014 Author Share Posted June 7, 2014 Chiller is still available. It has been cleaned and it's ready to shipping if anybody is interested. 400 euro for the chiller 100 euro for Iwaki MD30R pump with hoses reductions (pump is for 110v, I can arrange power supply for 230v is someone need) - 1920l/h Link to comment Share on other sites More sharing options...
VSG Posted June 9, 2014 Share Posted June 9, 2014 If only my paltry US circuits didn't go higher than 15 Amps :'( Link to comment Share on other sites More sharing options...
bartx Posted June 9, 2014 Author Share Posted June 9, 2014 Sorry, but I don't ship to US - too expensive and compressor won't work, it's for 230V. Link to comment Share on other sites More sharing options...
VSG Posted June 11, 2014 Share Posted June 11, 2014 I know, just saying that the US really needs better electrical circuits. Link to comment Share on other sites More sharing options...
bartx Posted August 15, 2014 Author Share Posted August 15, 2014 bump Link to comment Share on other sites More sharing options...
bartx Posted September 1, 2014 Author Share Posted September 1, 2014 (edited) bump Edited December 1, 2014 by bartx Link to comment Share on other sites More sharing options...
bartx Posted January 3, 2015 Author Share Posted January 3, 2015 bump, still available Link to comment Share on other sites More sharing options...
buildzoid Posted January 10, 2015 Share Posted January 10, 2015 PM sent Link to comment Share on other sites More sharing options...
Recommended Posts