Guest barbonenet Posted February 22, 2014 Share Posted February 22, 2014 ok guys here work fine.....use generiv vf1165;) pin 36 scl pin 35 sda search pin on card, it's already prepared set vgpu when gpu go in 3d mode, every times;) Quote Link to comment Share on other sites More sharing options...
elmor Posted February 27, 2014 Share Posted February 27, 2014 Cool, you mean the voltage is applied first when entering 3D? SVID mode or Override? Quote Link to comment Share on other sites More sharing options...
Guest barbonenet Posted February 27, 2014 Share Posted February 27, 2014 when enter in 3d mode must to press apply on evc software.....every times bench finish! Quote Link to comment Share on other sites More sharing options...
elmor Posted March 17, 2014 Share Posted March 17, 2014 Hmm, that's strange. As I asked, SVID or Override mode? Does both work? Quote Link to comment Share on other sites More sharing options...
Guest barbonenet Posted March 17, 2014 Share Posted March 17, 2014 override......the card switch 2d 3d every times finish an application 3d.....it's an very old card! Quote Link to comment Share on other sites More sharing options...
elmor Posted March 17, 2014 Share Posted March 17, 2014 Does any of the SVID voltages work? Quote Link to comment Share on other sites More sharing options...
Masterchief79 Posted August 24, 2014 Share Posted August 24, 2014 I'm just gonna use this thread... I just built a zombie out of an old artifacting HD2900XT after TiN's guide: http://kingpincooling.com/forum/showthread.php?t=1095 So there are two VT1165 controllers on there which can't be just FB-modded. One controls 6-phase GPU VRM, the other one one-phase Mem VRM. I would need one evc for each controller I suppose. I think you did not test 2900XT yourself yet? Do you think I can control my zombie with your evc's properly? Quote Link to comment Share on other sites More sharing options...
elmor Posted August 25, 2014 Share Posted August 25, 2014 One should be enough since they probably have different addresses. The VT1165 works, but in some cases it seems the maximum voltage is limited (~1.5v). Not sure why and as you said I have not been able to test on a 2900XT myself. Quote Link to comment Share on other sites More sharing options...
Masterchief79 Posted August 25, 2014 Share Posted August 25, 2014 So I guess I just have to try it then. If everything goes well, I can use it for my next session. Worst case: Good practice for my 5870 Lightning zombie. Quote Link to comment Share on other sites More sharing options...
Guest barbonenet Posted August 25, 2014 Share Posted August 25, 2014 i don't understand what you want:) i have x2900 for try...you whant to know max voltage can be set with evc??? Quote Link to comment Share on other sites More sharing options...
Masterchief79 Posted August 26, 2014 Share Posted August 26, 2014 Yes would be great to know. But don't kill your card Something around 1,6V would already be pretty okay. Quote Link to comment Share on other sites More sharing options...
Guest barbonenet Posted August 26, 2014 Share Posted August 26, 2014 ok but i need some days! now i'm benchimg with 780ti and 290x Quote Link to comment Share on other sites More sharing options...
Masterchief79 Posted August 26, 2014 Share Posted August 26, 2014 I'm not in a hurry thanks Glhf benching Quote Link to comment Share on other sites More sharing options...
Masterchief79 Posted November 8, 2014 Share Posted November 8, 2014 (edited) Got the eVc yesterday and tried it out. Works perfectly on my 2900XT Zombie. Was a little difficult to find SD and SC soldering points, but I got it working. "Generic VT1165MF" applies the voltage correctly. Some pics: http://abload.de/image.php?img=zombiebeschriftettlqb6.jpg http://abload.de/image.php?img=zombiecloseupbeschrif1tobd.jpg (SC pin on the back) Adding a vid, will edi // Edited November 8, 2014 by Masterchief79 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.