TridentX + Z77X-UD5H: Set TRRD=7

[sin0822]

as far as the samsungs go, ED i reported this over and over. I also gave them a set of PCS of mine, so they could look into it too. Apart from the generic samsungs(b/c normal samsungs seems to OC very fine) and apart from PSC for the most part(as i am pretty sure I saw cookie OC with PCS off the charts man, he just put in all the timings manually) the other memory OC fine. So those two are on the list now for not fully compatible, shame too on the samsungs I bet it is something stupid. Are you using the most recent beta LSD? BTW what one thing that is EXTREMELY odd with the samsungs, try to just use 1 stick, i bet you will boot upwards of 2666. 2 sticks much lower, that shouldn't be. I also don't think it matters if you put the 1 sticks in DIMM1 or DIMM2.

There is some incompatibility with some kits, there are just so many DDR kits, however what i was trying to convery is always set XMP and then go from there with the GB boards.

[Leeghoofd]

Tried my BBSE kit on the UD5H, sort off stable at 2600mhz at 1.83Vdimm. any tighter on the tert timings and she will crash... for TRCD 11 I need to go 1.87Vdimm... I need Zen Effect's sticks looooooooool



C'mon Steve who cares about one stick versus two

[zeneffect]

Originally Posted by Leeghoofd

Tried my BBSE kit on the UD5H, sort off stable at 2600mhz at 1.83Vdimm. any tighter on the tert timings and she will crash... for TRCD 11 I need to go 1.87Vdimm... I need Zen Effect's sticks looooooooool

you and me both!

ive got some psc im playing with right now... have some different bbse stashed away for a rainy day... cpu is totally NOT cooperating though lol.

[stasio]

Leeghoofd,
what you get with BBSE in XMP setting?
and what is your BBSE setting for daily use with Vdimm 1.65-1.66v?
Thanks.

My UD3H/D3H:
My XMP is 8-9-13-24-CR2 in Windows and BIOS MIT Current Status.
However,XMP is correct in BIOS Advanced Memory Setting/Ch.A
Pass Pi32 only with CL.9 (1.65V).

[stasio]

Originally Posted by Lsdmeasap

You had me going there for a minute, thought I was missing out on a setting again!

Here ya go!
http://www.mediafire.com/?pr8qa5zad6csc02

Lsd,
can you mod this 1.01.7 version:

http://www.mediafire.com/?zn69761upz4aem1

thanks.

[Leeghoofd]

Originally Posted by stasio

Leeghoofd,
what you get with BBSE in XMP setting?
and what is your BBSE setting for daily use with Vdimm 1.65-1.66v?
Thanks.

Same as your settings trp 13, also read out in bios correctly.



Lowered trp to 8 seems 32M stable at 1.65Vdimm

[Leeghoofd]

daily it will be 2400c9-11-9 1.65Vdimm, for benching I tighten the timings to 8-10-8 at 1.75Vdimm. My bench CPU caps out at 2450ish speeds

[stasio]

........Lowered trp to 8 seems 32M stable at 1.65Vdimm.....

Thanks,I'll try.

What about CR1?

[Leeghoofd]

Command rate 1 no problem either...

[stasio]

Thanks for your input.
Seems I must change my 2600K soon.