Go Back   HWBOT forum > Advanced overclocking > Memory Heaven (air/extreme)

Memory Heaven (air/extreme) Forgot what this line should be

Reply
 
Thread Tools Display Modes
  #211  
Old 06-11-2017
marco.is.not.80 marco.is.not.80 is offline
construction bot
 
Join Date: Nov 2015
Location: United States
Posts: 66
Thanks: 15
Thanked 17 Times in 12 Posts
marco.is.not.80
Default Re: B-Die Binning

A lot cheaper at Newegg:

https://www.newegg.com/Product/Produ...11%20601298182
__________________
Reply With Quote
  #212  
Old 06-23-2017
lilchronic lilchronic is offline
maintenance bot
 
Join Date: Jan 2013
Location: United States
Posts: 46
Thanks: 3
Thanked 5 Times in 5 Posts
lilchronic
Default Re: B-Die Binning

Quote:
Originally Posted by Leeghoofd View Post
3200 at 100 strap or 3333MHz (125 strap) 12-12-12-21 at 1.55 should be doable if your IMC/mobo can handle it... Which board mate ?

MSI Godlike/X99 SOC Champion here only do 3200MHz 32M stable, R5E/Godlike Carbon does 3333MHz with same hardware. SA voltage is important!!

Attachment 5557

Attachment 5558

Attachment 5559
I have the x99 soc champ capable of running 3466Mhz 12-12-12-28 With a 4x8Ghz set of 3200Mhz cl14 g.skill. This kit is not the best set either. Tested on z170M oc formula with a 7350k and was able to only get it superpi 32m stable @ 3466Mhz 12-12-12-28 using the 3600Mhz cl12 preset the oc formula has. I also have the 2x8GB 3600Mhz cl16 kit that will do 4000Mhz 12-11-11-28 @ 1.94v but have not tested in x99, looking for another good set.
So im pretty sure the soc champ can do better than 3333Mhz with a good set of b-die ulness you were specifically talking about the zadak b-die
http://forum.hwbot.org/attachment.ph...1&d=1498206792
http://forum.hwbot.org/attachment.ph...1&d=1498206792
__________________

Last edited by lilchronic; 06-23-2017 at 09:52.
Reply With Quote
  #213  
Old 06-23-2017
Leeghoofd Leeghoofd is offline
Banned by Mafio
 
Join Date: May 2007
Posts: 3,719
Thanks: 393
Thanked 369 Times in 246 Posts
Leeghoofd is a jewel in the roughLeeghoofd is a jewel in the roughLeeghoofd is a jewel in the roughLeeghoofd is a jewel in the rough
Default Re: B-Die Binning

is that 3466 pi32M stable ? Anyway you got a good combo rocking man!!!
__________________
Proud to be a warehouse OCer you don't like it ? Too bad 4 you...
Reply With Quote
  #214  
Old 06-23-2017
lilchronic lilchronic is offline
maintenance bot
 
Join Date: Jan 2013
Location: United States
Posts: 46
Thanks: 3
Thanked 5 Times in 5 Posts
lilchronic
Red face Re: B-Die Binning

Quote:
Originally Posted by Leeghoofd View Post
is that 3466 pi32M stable ? Anyway you got a good combo rocking man!!!

honestly i haven't tested 32m on x99 with those stick's that much as i don't want to push my chip that hard on just water cooling. My last 5820k i killed the imc some how and it would only run dual channel.

When i tested those stick's on z170 thou i was only able to get 32M stable @ 3466Mhz 12-12-12-28 max with the two best stick's no matter what voltage i used i couldent get higher. Weird thing is i can take these stick's all the way up 4300Mhz with 19-21-21- and run a stable 3733Mhz 17-17-17-37-1T @ 1.4v and 500% of hci memtest.

These are the 4x8Gb 3200Mhz 14-14-14-34 G.skill, My 3600Mhz cl16 kit is much better i just need another set that will match what they can do.
__________________
Reply With Quote
The Following User Says Thank You to lilchronic For This Useful Post:
sabishiihito (06-24-2017)
  #215  
Old 07-11-2017
tistou77 tistou77 is offline
kitchen robot
 
Join Date: Dec 2016
Posts: 6
Thanks: 1
Thanked 0 Times in 0 Posts
tistou77 is on a distinguished road
Default Re: B-Die Binning

Hello

The G.Skill 4000 C18 kits have B-Die of the same quality as the 3600 C15 kits?
Or it is rather the same quality as the 3600 C16 ?

Just to know if with a 4000 C18 kit I can have 3600 C15 to 1.35v

Thanks
Reply With Quote
  #216  
Old 07-14-2017
tistou77 tistou77 is offline
kitchen robot
 
Join Date: Dec 2016
Posts: 6
Thanks: 1
Thanked 0 Times in 0 Posts
tistou77 is on a distinguished road
Default Re: B-Die Binning

Quote:
Originally Posted by tistou77 View Post
Hello

The G.Skill 4000 C18 kits have B-Die of the same quality as the 3600 C15 kits?
Or it is rather the same quality as the 3600 C16 ?

Just to know if with a 4000 C18 kit I can have 3600 C15 to 1.35v

Thanks
Up please

To know if I take the kit 4000 C18 and I can have 3600 C15 to ~ 1.35v (and after a higher frequency on X299)
Or if I take the kit 3600 C15 (stable at 3733 C16 and 1.35v)

Thanks so much
Reply With Quote
  #217  
Old 07-14-2017
Alex@ro Alex@ro is offline
robot overlord
 
Join Date: Oct 2007
Location: Romania
Posts: 1,263
Thanks: 116
Thanked 341 Times in 145 Posts
Alex@ro will become famous soon enoughAlex@ro will become famous soon enough
Default Re: B-Die Binning

3600C15 is not a harsh spec,, 4000 c18 factory will do this easily
Reply With Quote
The Following User Says Thank You to Alex@ro For This Useful Post:
tistou77 (07-14-2017)
  #218  
Old 07-14-2017
tistou77 tistou77 is offline
kitchen robot
 
Join Date: Dec 2016
Posts: 6
Thanks: 1
Thanked 0 Times in 0 Posts
tistou77 is on a distinguished road
Default Re: B-Die Binning

Quote:
Originally Posted by tistou77 View Post
Up please

To know if I take the kit 4000 C18 and I can have 3600 C15 to ~ 1.35v (and after a higher frequency on X299)
Or if I take the kit 3600 C15 (stable at 3733 C16 and 1.35v)

Thanks so much
Ok thanks, so with a kit G.Skill 4000 C18, it is possible to have 3600 C15 to 1.35v

G.Skill only made 1 kit 3600 C15 (no 3200 C13 for example) at 1.35v
But many kit 3200 C14 or 3600 C16
And I was wondering if the 4000 C18 kits had the same B-Die as the 3600 C15 or rather the same as the 3200 C14, 3600 C16

But to be sure, will have to test I think
I saw a review where with the 4000 C19, it was 3200 C15 at 1.35v
I guess with 4000 C18, it's 3400 C14 and so impossible to have 3600 C15

Last edited by tistou77; 07-14-2017 at 23:43.
Reply With Quote
  #219  
Old 07-15-2017
tistou77 tistou77 is offline
kitchen robot
 
Join Date: Dec 2016
Posts: 6
Thanks: 1
Thanked 0 Times in 0 Posts
tistou77 is on a distinguished road
Default Re: B-Die Binning

With a kit G.Skill 3200 C14, the 4000 C18 is "stable" at 1.35v
No need I test kit 4000 C18 I think, I could not have 3600 C15 (or 3733 C16, eg) at 1.35v
Reply With Quote
  #220  
Old 08-03-2017
egyteam egyteam is offline
kitchen robot
 
Join Date: Jan 2014
Location: Egypt
Posts: 4
Thanks: 2
Thanked 0 Times in 0 Posts
egyteam
Default Re: B-Die Binning

Could someone confirm if the Corsair Dominator 3466 C16 CMD16GX4M2B3466C16 is using the Samsung B die?
__________________
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I go about binning? Lays General hardware discussion 17 05-20-2015 17:02
Binning Haswell CPUs for memory OC sabishiihito Memory Heaven (air/extreme) 9 09-28-2014 08:59
AMD A10-5800K Binning (45 samples) [HOW-TO BIN] Massman Trinity / Piledriver / Richland OC 7 12-17-2012 10:20
Binning 163x i7 3770K Christian Ney Ivy Bridge (Z77) OC 69 11-23-2012 13:12
Whats your procedure for binning IB? ZMBKLN Ivy Bridge (Z77) OC 17 11-06-2012 11:22


All times are GMT +1. The time now is 16:02.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright HWBOT 2004 - 2015