Go Back   HWBOT forum > Overclocking & benchmarking > Intel CPU Overclocking > X58A-OC Owners Club

X58A-OC Owners Club Meet and greet other proud owners of GIGABYTE's X58A-OC mainboard

Reply
 
Thread Tools Display Modes
  #1  
Old 07-10-2011
Lsdmeasap's Avatar
Lsdmeasap Lsdmeasap is offline
maintenance bot
 
Join Date: Aug 2009
Location: UNITED STATES
Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
Lsdmeasap
Default Gigabyte X58A-OC Takes Bclk World Record @ 276.42 Bclk!!

Gigabyte X58A-OC Takes X58 Bclk World Record @ 276.42 Bclk!!



Hi guys and gals!

After my recent Bclk adventures on phase, I knew it was time to get this setup under some colder temps and try to secure a world record. Yesterday the board was frozen, and the world record at HWBot for Bclk was mine

This is my first world record, I'm so excited!!! So, all you Ln2 users with a X58A-OC board, please let me enjoy the limelight for a little while - thanks! J/K, keep on pushing guys!

This only took me about 10 minutes after booting from the settings I used on phase, tried for more for an hour or two, but this was the limit of this CPU on dice temps. Needless to say I had plenty of dry ice left over haha! I also just realized I had the Uncore set higher than I thought and that may have actually been what stopped me instead of the actual Bclk being the limiting factor. I had it set to x16 and meant to have it on 12-13, so I may be able to take this further with less uncore, we'll see next time around or shortly on phase


Hardware used:
GIGABYTE GA-X58A-OC Motherboard BIOS F5b (What a beast!)
Intel 920 C0/C1 CPU
Mushkin Ridgeback 998826 (4GB) Memory
Crucial RealSSD C300 128GB SSD
PNY FX 5500 - 128MB PCI Graphics card
NZXT Hale90 750W PSU
Dry Ice W/ Acetone @ BartX Custom Dice Pot


The voltages and settings I used can for the most part be seen in the 272 SuperPI 1MB screenshot below, except a little less IOH and a little more PCIE (1.36V / 125.8) for the 276.42 Bclk, if you'd like to know more feel free to ask - enjoy!





SuperPI 1MB 272 Bclk!! (Could have possibly done it higher, forgot to go back and try )

Click to enlarge





And finally the world record!!

Here is the top 20 current HWBot standings for X58 Reference Clock



Hardware news, Overclocking Competitions, Reviews


276.42 Bclk 4c/8t



CPU-z Validation Link - 276.42 Bclk

Hardware news, Overclocking Competitions, Reviews


I was also able to achieve 263.5 Bclk using x19 multiplier, this CPU isn't able to reach much above 5Ghz though, maybe only about 5.2GHz or so. So that, and the fact that higher voltages and temps mean lower Bclk, this was all I could get using the x19 multi during my short attempts on that multi.

263.5 Bclk @ X19 Multi 4c/8t


CPU-z Validation Link - 263.5 Bclk


Also, here's a video of booting at 260 Bclk, then going up to 276 in windows, for anyone thinking these are from the Bclk bugging out




Quote:
Originally Posted by Lsdmeasap
I felt I needed to add this in, I see many people commenting that this is a golden or binned CPU. In reality it's more like the exact opposite, this was likely a bottom of the barrel and that's why it was sent my way to learn with!

To anyone thinking this is a binned CPU, it FOR SURE IS NOT!!!

This CPU was sent my way back when X58 came out, and was only sent to me so that I could learn X58 to better be able to help others with their issues. This CPU is for sure not a golden or binned sample, it can barely do 5.2Ghz. It's been sitting on my shelf unused for a long time because I have other newer better CPU's, and it's been sitting due to that and because this is one of the early ones with locked memory multipliers at 8/10.

I am not an extreme enough overclocker to be sent binned or cherry picked CPU's, far from it!!

Bclk is all about the CPU though, my other 2 can't go this high on Bclk but then can do MUCH better overall Ghz. If anyone wants to send me a 920 for testing I'll be up for testing it, otherwise don't comment that I need to test retail as there is no point really because this CPU is the same or worse than retail (Likely much worse since it's early C0/C1 and locked memory multi's). I can't afford to bin, and no one is binning for me because I'm not a record breaking extreme overclocker, I only have access to Phase and Dry Ice, binned CPU's and cherry picked samples end up in the hands of extreme LN2 users whom are known for breaking important records such as 3DMark, PCMark, ect.

So to sum it up, this is NOT a Golden, NOT Cherry Picked, and NOT hand picked sample!! This is a run of the mill, sub-average overclocking, very early sample, only sent my way to learn X58 (Overclocking was not in mind at all). It's only luck of the draw that this CPU can do high Bclk's, and you get that luck of the draw with any CPU, that's all it can do is high Bclk and I only found that out by luck in choosing to dig out this CPU and give it a try again (it could only do 231 Bclk previously on UD4P).

Huge thanks to everyone @ GIGABYTE for all of their continued support!!
__________________

Last edited by Lsdmeasap; 07-12-2011 at 15:30.
Reply With Quote
  #2  
Old 07-10-2011
Christian Ney's Avatar
Christian Ney Christian Ney is offline
Single Point of Contact
 
Join Date: Apr 2010
Location: Geneva, Switzerland
Posts: 7,490
Thanks: 3
Thanked 369 Times in 168 Posts
Christian Ney is on a distinguished road
Default

w00t, congratz
Reply With Quote
  #3  
Old 07-10-2011
TaPaKaH TaPaKaH is offline
robot overlord
 
Join Date: Dec 2006
Location: The Netherlands
Posts: 2,808
Thanks: 34
Thanked 268 Times in 102 Posts
TaPaKaH
Send a message via ICQ to TaPaKaH Send a message via Skype™ to TaPaKaH
Default

C1, especially ES, were very bad for BCLK .. did you try any D0 ?
Reply With Quote
  #4  
Old 07-10-2011
Lsdmeasap's Avatar
Lsdmeasap Lsdmeasap is offline
maintenance bot
 
Join Date: Aug 2009
Location: UNITED STATES
Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
Lsdmeasap
Default

Quote:
Originally Posted by Christian Ney View Post
w00t, congratz
Thanks man, I'm super excited as it's my first world record!

Quote:
Originally Posted by Sam OCX View Post
C1, especially ES, were very bad for BCLK .. did you try any D0 ?
No, I don't have any D0 CPU's, I only have C0/C1 920 and 965 as far as quads go. I have a 980X I used to think would be the best because it could boot 246 on water, but I could only get it up to about 251 or so frozen, so it turned out it wasn't so great for Bclk.
__________________
Reply With Quote
  #5  
Old 07-18-2011
delly's Avatar
delly delly is offline
robo cop
 
Join Date: Nov 2010
Location: Italy
Posts: 294
Thanks: 20
Thanked 19 Times in 19 Posts
delly
Default

awesome...

congrats!!
__________________
Reply With Quote
  #6  
Old 07-24-2011
Lsdmeasap's Avatar
Lsdmeasap Lsdmeasap is offline
maintenance bot
 
Join Date: Aug 2009
Location: UNITED STATES
Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
Lsdmeasap
Default

Quote:
Originally Posted by Sam OCX View Post
C1, especially ES, were very bad for BCLK .. did you try any D0 ?
Just tried a W3520 D0 on phase and could only get 260 or so, maybe 265 would be possible on dice with that CPU not sure. So CPU itself matters more than I had ever thought!

Quote:
Originally Posted by delly View Post
awesome...

congrats!!
Thanks!!!!
__________________
Reply With Quote
  #7  
Old 07-24-2011
Mafio's Avatar
Mafio Mafio is offline
Banned by Thebanik
 
Join Date: May 2008
Location: Italy
Posts: 231
Thanks: 0
Thanked 0 Times in 0 Posts
Mafio
Default

crazy BCLK, congrats
Reply With Quote
  #8  
Old 07-24-2011
TaPaKaH TaPaKaH is offline
robot overlord
 
Join Date: Dec 2006
Location: The Netherlands
Posts: 2,808
Thanks: 34
Thanked 268 Times in 102 Posts
TaPaKaH
Send a message via ICQ to TaPaKaH Send a message via Skype™ to TaPaKaH
Default

You got very lucky with that C0/C1 ES then.
I had a few of those in the first days of 1366 - most couldn't even hit 200.
On average, C1 retails were a tad better and D0 - even better than that.
Reply With Quote
  #9  
Old 07-25-2011
Lsdmeasap's Avatar
Lsdmeasap Lsdmeasap is offline
maintenance bot
 
Join Date: Aug 2009
Location: UNITED STATES
Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
Lsdmeasap
Default

Quote:
Originally Posted by Mafio View Post
crazy BCLK, congrats
Thanks man!!

Quote:
Originally Posted by Sam OCX View Post
You got very lucky with that C0/C1 ES then.
I had a few of those in the first days of 1366 - most couldn't even hit 200.
On average, C1 retails were a tad better and D0 - even better than that.
Yes, I do believe it's all the luck of the CPU mainly, and I almost didn't even test Bclk with this 920 CPU too!

I've now tested two W3250's/DO's since 1366 came out, and neither were any better or worse than any C0/C1's I have, ES or retail they all seemed to have their own respective advantages or disadvantages. It really just all seemed to me to be how lucky or unlucky I was with each CPU itself, rather than if it was a new stepping, ES/Retail, or better batch, ect. or anything like that.
__________________
Reply With Quote
  #10  
Old 02-08-2017
lanpartyut lanpartyut is offline
kitchen robot
 
Join Date: Jan 2017
Location: chinese
Posts: 5
Thanks: 1
Thanked 0 Times in 0 Posts
lanpartyut is on a distinguished road
Default Re: Gigabyte X58A-OC Takes Bclk World Record @ 276.42 Bclk!!

good job
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:16.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright HWBOT 2004 - 2015