Go Back   HWBOT forum > >

General overclocking All things overclocking that doesn't anywhere else

Spi32m help needed.

User Tag List

Reply
 
Thread Tools Display Modes
  #1  
Old 04-17-2017
SirTryAlot SirTryAlot is offline
maintenance bot
 
Join Date: Aug 2016
Location: Switzerland
Posts: 26
Thanks: 2
Thanked 3 Times in 3 Posts
SirTryAlot
Default Spi32m help needed.

Hi Guys. It's getting time to learn Spi32m for me now.

Is one of the pros willing to make a short tutorial how to set up Windows(with tweaks), and how wazza works? Just from the view angle of having absolutely no clue at all how it works. You guys would help me alot

Thanks already in advance =)
__________________
Reply With Quote
  #2  
Old 04-18-2017
zeropluszero's Avatar
zeropluszero zeropluszero is offline
robot overlord
 
Join Date: Apr 2011
Location: Kangaroo
Posts: 1,313
Thanks: 427
Thanked 324 Times in 185 Posts
zeropluszero is on a distinguished road
Default Re: Spi32m help needed.

Super PI 32m tweaking guide
__________________

Quote:
Originally Posted by RULE View Post
Because I'm a well know cheater
Quote:
Originally Posted by Massman View Post
the most responsible overclocker in the world: @zeropluszero
Quote:
Originally Posted by l0ud_sil3nc3 View Post
The only cpu's I give back are dead ones
Reply With Quote
  #3  
Old 04-18-2017
GtiJason's Avatar
GtiJason GtiJason is offline
transformer
 
Join Date: Oct 2014
Location: Milwaukee, WI United States
Posts: 704
Thanks: 287
Thanked 292 Times in 184 Posts
GtiJason is on a distinguished road
Send a message via Skype™ to GtiJason
Default Re: Spi32m help needed.

Overclock.net HWbot Team - Page 474
Create Folder on Desktop called "To Eram". Put Super Pi program in it

After E Ram installed, Lay's ERam install for Super Pi 32m - Album on Imgur click on my Computer and you'll see "Z drive"

Drag Z drive to desktop (copy)

Now drag "to eram" folder (super pi) to Z drive on desktop
open that Z drive, open "to eram" folder in z drive
right click drag super pi to desktop to create shortcut

Open the Super Pi in - to eram folder
grab bottom right corner of super pi window and pull up and left until you only see top bar with super pi logo and Super Pi / mod 1.5 XS
Hit Alt C (for calculate), then hit Enter 3 times. this runs 16K
do this like 15 times to get good score, close super pi and restart computer

Drag "To Eram" to "Z drive" on desktop,
Open Shortcut you made before restart and run 16K once.
Now click Alt C, down arrow until you get to 32m, hit "Enter" ONCE only
You'll see screen that says "Hit Enter to run 32m" just leave it alone or move to side
Open OCX Pi Tweaker
Open Task Manager (Ctrl Shift Esc)
Details Tab, right click SuperPi, set Priority "Realtime"
Right click Super Pi again, go to "Affinity" and have checkmark only in cpu core box "1"
Core 1 is not always fastest or highest clocking, for best results try all 4 (core 0/1/2/3)
If core 0 or 1 is best, set bios to 2 cores HyperThread Off
If core 2 or 3 is the best core (Highest stable OC) then set bios accordingly; 3 core HT off, or all 4
For Services I like to use the minimum possible
Keep only "Plug and Play" and "Remote Procedure Call (RPC)"
Disable "Shell Hardware Detection" "DCOM Server Process"
"Event Log" (Event Log disabled makes boot slow so somedays I keep it enabled)

Run Waza with OCX SPI Tweaker V. 1.08
For Z87 / 97 / 170 / 270 a good starting point is Set like this:
Size in MB "1200"
Super Pi partition "C"
Second partition "D"
Single file size in KB "1024"
Check box next to "CDT"
Sleep Period "0 sec."
Click "Run"
Watch Task Manager "Available Memory" and after OCX Pi tweaker finishes and closes itself keep watching mem, It will be rising and when it gets to 520000-540000 it will slow down/stop rising
Close Task Manager
Hit "Enter" to run Super Pi, you may have to click on window that says "Hit Enter to run 32m" with the mouse so it's active.
Sit back for just under 6 minutes and watch your hard work - Go to Work !

# Additional Notes / Troubleshooting: Thank you Splave, CL3P2O and the rest of the OC community for documenting this info across the web so I could read and try !!!

*eram = minimizes loop times early in bench, good for small gain or increase in efficiency
maxmem setting for OS = super important.. values from ~580 - 650MB work well depending on Wazza size used, you may notice better times with one vs. other

*wazza can also crash the bench when youre on the edge of stability.. starting small with just d->c , then building wazza to c->d->c works well for avoiding errors..sometimes with very tight settings its impossible to run very large wazza

*pi.rec file = SAVE YOURS! All pro 32m benchers have their fastest 32m run saved for the purpose of keeping the pi.rec file that is created during the bench. While somewhat placebo.. its how you get very tiny opening loop times (delete existing and copy your saved pi.rec file into bench)

*Drivers:There is no need to install MEI or Chipset, but if you do you can install manually via device manager. Thanks to Splave I know that Chipset=smbus and MEI=PCI Simple communication

*Wahaha: I do not personally use Wahaha!, (another way to raise available ram). I find that it throws my start time off, meaning the time I hit enter to start 32m because it doesn't work hand in hand with Waza. Eram seems to work on all platforms pretty consitantly, but what counts even more for eram fast start is when you are waiting for avilable mem to rise exactly when you close task manager and hit enter to run 32m

*Pay attention/ follow steps to a tee. A lot of people are doing something wrong with eram too, you should always open eram in control panel after setup or perica .gho install and set by hand. I just change size from 25000mb to 100000 and click modify before restarting comp you then need to open eram folder and double-click autounattend 2 times then restart

*ctfmon: Same with new task in task manager, go to file, new task, type ctfmon then enter. You must do this twice to make sure ctfmon automatically starts with windows. This also helps fast start, it's a combination of ctfmon, eram and waza
These things all make a difference and the only way to come close to matching top guys efficiency

*OCX Pi tweaker: For waza I don't usually use OCX Pi tweaker simply because it was made for people who do not understand what they are trying to accomplish. Thats why there is the timer and auto close features. If you just create waza files one time in OCX Pi tweaker you can simply open C and D and copy those files from C to D, D to C, C to D or however you want. Just make sure you test just C to D or D to C solo because one way is faster. When you know that, then you should copy that more than the other such as start and finish with it, like in the first example or switch it up with something like C to D, D to C, C to D (twice) and so on

https://barbonenet.wordpress.com/201...-my-xp-spi-os/

Barbonet Wanted XP OS for SuperPi
• Open toeram folder, double-click SuperPi
• Shrink pi window, run 16k till best time (5g is .06x s)
Create Drive D for waza
Start, Control Panel, Admin Tools, Comp Manegement, Disc Management,
New Partition>Letter D, Perform Quick Format
Open drive C, Waza. Copy Pagefile.rar, Paste 9 times (1.25gb)
Back to C, Copy this Waza folder
Paste to drive D
Disable a few un-needed services
Start, Control Panel, Admin Tools, Services
Keep only "Plug and Play" and "Remote Procedure Call (RPC)"
Disable "Shell Hardware Detection" "DCOM Server Process" "Event Log" (Event Log disabled makes boot slow)
Restart Computer

OS was designed to not use mouse to run SuperPi, so keyboard only from this point on. (Except for shrinkin SuperPi window, Barbonet any idea about this ?)
ToEram folder, ctrl C
Eram, enter to open. ctrl V to paste ToEram inside Eram
Alt F4 to close window
Move to RUN.bat, press enter to start waza batch file
Press any key to continue.....
After it finishes wait 90 seconds
Then time for SuperPi, shrink Pi window, run 16k several times and finally 32m
After 32m finishes, Ctrl shift X to open explorer
File, New task, type: "explorer"
Right Click on bottom Windows Bar, "Tile Windows Vertically"
Now open CPU-Z Windows, make sure proper background is showing (for Comps etc.) Take SCREENSHOT

System for superPi 32m/1m by Perica_barii
http://forum.hwbot.org/showpost.php?...91&postcount=1
__________________

Last edited by GtiJason; 04-19-2017 at 00:31.
Reply With Quote
The Following 4 Users Say Thank You to GtiJason For This Useful Post:
bigblock990 (04-19-2017), Chilli-Man (04-19-2017), Gunslinger (04-18-2017), SirTryAlot (04-18-2017)
  #4  
Old 04-18-2017
SirTryAlot SirTryAlot is offline
maintenance bot
 
Join Date: Aug 2016
Location: Switzerland
Posts: 26
Thanks: 2
Thanked 3 Times in 3 Posts
SirTryAlot
Default Re: Spi32m help needed.

WOW exactly something like this is what i needed. Thanks alot GTiJason!
__________________
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Nvidia Inspector help needed W8.1 Gunslinger HWBOT Software and Apps 13 07-04-2017 20:11
Help needed - a8-3870k Still alive. PabloCol Rookies Help Rookies 2 04-02-2017 14:08
Help needed Troubleshooting OS Hulio Rookies Help Rookies 3 03-27-2017 11:36
Sick Rig - r640 with current GPU - debugging hints needed tmc General hardware discussion 1 01-19-2017 02:46
BCLK Tuning on i5 6600 non-K : help needed DedezO_83 Overclocking.guide 2 01-05-2017 11:21


All times are GMT +1. The time now is 13:24.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimisation provided by DragonByte SEO (Lite) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright HWBOT 2004 - 2015