Evga SR-2 A53 bios : C1E option added

[Chiller]

Here for the SR-2 users a new bios version with the C1E option added,
and some better Bclock OC.

C1E option is under Cpu settings.

Flash methode included for windows 32b/64b and DOS.

Have fun with it.

When encounter faults, problems or any other not normal thing, just let me know, i pas it on

http://i55.tinypic.com/kb813c.jpg

[mosie]

HIHI

Who modified this bios ?


For flashing, change name bios 1W555A53.rom to 1W555A50.rom


my test:



http://www.kingpincooling.com/forum/...?t=1241&page=3


THX chiller

[Antinomy]

Only C1E? LOL

There's a bunch of locked stuff left - QPI slow mode, Memory controller mode (Xeon/NUMA stuff), peripheral stuff - PCI-E ports Priority, Enable/Disable and APIC. Some other stuff like "Hit del message display" and "Wait for "F1" if Error".

Might be even more, didn't look deeper.

Well, the memory mode is more like RAM RAID. While NUMA has a different menu hidden a bit deeper.

[mosie]

Originally Posted by Antinomy

Only C1E? LOL

There's a bunch of locked stuff left - QPI slow mode, Memory controller mode (Xeon/NUMA stuff), peripheral stuff - PCI-E ports Priority, Enable/Disable and APIC. Some other stuff like "Hit del message display" and "Wait for "F1" if Error".
.

+1

and:

real GHz cpu in post screen, in defaut change ordering check PCIE ....

[Chiller]

i sended it to Evga this question :


High Prio :

QPI slow mode,
Memory controller mode (NUMA options),
Peripheral stuff - PCI-E ports Priority,
Enable/Disable APIC,
Possible to disable NUMA with dual GPU vga in the system,
Possibility to run a out-of-shop raid ssd PciE (look at revodrive's).

Low prio :

"Hit del message display" and "Wait for "F1" if Error".

[mosie]

Possible to disable NUMA with dual GPU vga in the system

Its phisicaly possible ?

[Chiller]

normally yes,
NUMA option is about sharing the mem for both cpu, or dedicated mem for each cpu.

stranbge that numa disabling doesn't work with a dual gpu vga in mobo

[mosie]

possible its due to low gap memory can t alocate RAM per GPU when NUMA disable.

[Chiller]

Low gap option is also in bios, but doesn't help in any way you set it

[Chiller]

Update :

Seems that USB3 problems (BSOD) is of the track, used all night usb3 in all kind of situations and don't get any BSOD anymore, hope other users can confirm that ?