|
#141
|
|||
|
|||
Quote:
I didnt have any water/ice on mem slots since i had hairdryer blowin them whole session, checked that asap when 55 code came. Didnt even have hard reset, just booted with safe settings to go into bios put some more juice and then board never booted past 55 code. (So was never able to put even more clock/volts) Tryed already two ivys and both is alive and gave same 55 code. Then changed 2500k on it and it gave me first 55 code, then 20code and then it started just bootloop without any codes. Now i RMA'd board fev days ago since i didnt find any solution to fix that. Can u check do ur mobos give only 0.4volts to memslots? For me it did so thats the reason why not booting, just need to figure WHY it only give 0,4volts.
__________________
|
|
#142
06-05-2012, 13:34
|
|||
|
|||
|
Thanks, yes the volt output on our boards is like yours, we didnt have any condense or water any where, the forste board did it allready after 5 minutes
 i Know lots off other people having same problem, its just that many people never say when there hw dies on them  i know that another 5 boards have done the same. with the same error. We continiud playing with an asus board, and finished using our ln2 on that. It was stabil for over 5 hours, no error nothing.Quote:
__________________
Last edited by vanovich; 06-05-2012 at 13:40.
|
|
#143
06-05-2012, 13:48
|
|||
|
|||
|
My intention with this thread is to try and find out why or what couses it to come with that error. For me it was a short experiance trying to participate in this contest. and an expensive one. lol I didnt even get to bench 3d marks. But the problem could be something with that biose!
__________________
|
|
#144
06-05-2012, 20:28
|
|||
|
|||
|
Thats what im trying too and i think msi is working on it too
Did u have any backup flash while getting overclockin failed (Mine did flash back original bios when i set too tight ram timing fev times) If that could somehow get bios stuck etc. I bought all parts too and it was kinda expensive, atleast i was able to test lightning too. But board died before i started run full tests -.- And now im kinda pissed since i RMA'd board and company where i bought it is whining about dirt on motherboard wich have nothing to do with this problem 
__________________
|
|
#145
06-06-2012, 04:17
|
|||
|
|||
|
why is no one using gd 80?
__________________
|
|
#146
06-06-2012, 05:06
|
||||
|
||||
|
For the Z77, because it wasn't avaiblable in retail stores at the beginning of the competition and so it is forbidden by the rules.
Christian
__________________
BR Christian massman: "Using a mouse to adjust BIOS settings is like driving a car with automatic transmission. Even if you break all speed records, it's still incredibly gay..." -> True Story! Last edited by fuzz3l; 06-06-2012 at 05:43.
|
|
#147
06-06-2012, 08:49
|
|||
|
|||
|
Ahh ok retail in stores for apac now
__________________
|
|
#150
06-07-2012, 07:36
|
||||
|
||||
|
Quote:
__________________
Where courage, motivation and ignorance meet, a persistent idiot awakens. Things people say: Massman is a god (05-02-2102), You're a genius (25-10-2011), Massman, overlord of overclocking (07-30-2010), brain dead corporate dude that deserves to be stillborn (09-18-2010) Things I write: Critical thinking - Should Maximus V Extreme be banned from competitive overclocking?, HWBOT Vision 2012, The Industry’s Social Responsibilities – Support the Community., In Response to Chew's Goodbye Note (the unhealthy relation between company and community), The X58A-OC, the enthusiast community and a long-term vision, The Efficiency Rating, Hardware sharing, nostra culpa?, The paradox of a fair overclocking competition, HWBOT Memory Index v0.1, AMD Thuban Voltage and Temperature Scaling, Is LN2 on GPU really worth the trouble?
|
 |
| Thread Tools | |
|
|
