|
#1
|
|||
|
|||
problem with cpu socket 370 .... only expert!
prejudice to all do not understand why I can not rise above 206 MHz bus with no cpu, everything and stable (tested with various cpu)
I clicked on ULTRA but nothing changes, the motherboard used CUSL example http://hwbot.org/submission/2223457_...70_1225.43_mhz http://hwbot.org/submission/2268715_...370_917.95_mhz
__________________
|
|
#2
03-26-2012, 14:53
|
||||
|
||||
|
Strange :/ You used latest/different versions of bios/setfsb
Note that "Ultra" mode isn't needed under 400/500 fsb 
__________________
Quote:
|
|
#3
03-26-2012, 15:30
|
|||
|
|||
|
the bios is the latest...
the latest version of setfsb is shareware :-(
__________________
|
|
#4
03-26-2012, 15:31
|
|||
|
|||
|
Turrican are you there? :-)
__________________
|
|
#5
03-26-2012, 15:31
|
||||
|
||||
|
go to "custom" page and adjust the scale manually.
__________________
Chi 'a vo' cruda o chi 'a vo' cotta, siete tutti dei gran figli de mignotta. Chi 'a vo' rotta o chi 'a vo' sana, lei resta sempre 'n gran fijo de puttana.
|
|
#6
03-26-2012, 19:27
|
|||
|
|||
|
My tusl cannot go over 207mhz fsb wall no matter what is core voltage, cpu, vio voltage and mem. Anyway my cusl can - but higher clocks make really big stress to hdd as pci clocks ran over 50 mhz. Try lowering dma/pio mode for hdd in cmos setup, try higher Vio using jumpers near mem capacitors (short all of them after boot to get >3.9v - in case u short them before system won't boot), try different ram modes and sticks. Frequencies over 200fsb/1300 cpu are "lucky draw" for cB0/cC0 as far as i see it.
Good luck anyway.
__________________
|
|
#7
03-26-2012, 21:00
|
|||
|
|||
|
235mhz bus !!! wowww
http://hwbot.org/submission/2188579_...70_1410.37_mhz HD don't break ?? you use setfsb ?
__________________
|
|
#8
03-27-2012, 21:15
|
|||
|
|||
|
yes, i use setfsb all the time. My seagate 7200.7 fails if pci clock exceeds something like 47 mhz, my quantum fireball can stand 50 mhz. Anyway right now i use gembird ide2sata converter and sata drive and it is stable at the same clocks fireball is.
__________________
|
|
#9
03-30-2012, 12:40
|
|||
|
|||
|
today i try to use a pci ide card bootable ... i have broken 5 HD at 50mhz pci...
__________________
|
 |
| Thread Tools | |
|
|
